Technology of Flame Spray -old and new
01-29-2015, 10:04 AM,
#1
Technology of Flame Spray -old and new
Technology of Flame Spray-old and new
Dear colleagues
Technology Flame Spray quite old technology. But it still finds his success with the effective use and it can not be ignore . Our company manufactures portable Flame Spray equipment Termika-2 application examples which you can see on the videos.Moreover, in some cases this technology is the most effective.
https://www.youtube.com/watch?v=rMUeseNXKMY
https://www.youtube.com/watch?v=3XXPy0xeet8

We would appreciate comments and suggestions
Thank you in advance
Best Regards
A.Termika Ltd
a.termika@gmail.com


Attached Files Thumbnail(s)
               
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Staring procedure for 6p-II flame spray mgbaca1 0 146 01-23-2024, 08:11 PM
Last Post: mgbaca1
  Assembling a second-hand zinc flame spray setup? Gasket 6 1,167 01-22-2024, 12:09 PM
Last Post: MarkDattilo
  Flame spray parameters TurbineRepair 12 21,763 12-10-2022, 05:27 AM
Last Post: SakshiVerma
  The Ps-PVD Technology mgbaca1a 0 1,743 09-23-2018, 05:11 PM
Last Post: mgbaca1a
  Propeller shaft repair by flame spray in the cones area Iwan Sedaryawan CA 1 3,129 12-09-2016, 04:56 AM
Last Post: Stephen Booth
  Flame spray guns 5P, 5PII, Type N Hector Monjardin 1 3,809 11-17-2016, 10:35 PM
Last Post: mgbaca
  Build up with Powder Flame Spray Met.Eng. 8 10,593 05-30-2016, 12:08 PM
Last Post: Gordon
  Wire Flame spray and Twin Arc spraying wtaz 1 4,190 03-30-2015, 09:41 PM
Last Post: loriolo
  acetylene flow limits for flame spray metco 6c chromalloymachi112 1 4,158 12-04-2014, 12:18 AM
Last Post: Met.Eng.
  Technical Characteristics of Rich Laser Cladding Technology lijianping 0 3,169 05-17-2014, 06:15 AM
Last Post: lijianping
  "Flame Spray Handbook" sal 0 4,801 04-28-2013, 07:49 PM
Last Post: sal
  16 E flame spray sal 4 6,524 09-17-2012, 08:32 AM
Last Post: loriolo
  Powder Flame Spray for Ceramics Met.Eng. 9 11,013 09-19-2011, 04:46 PM
Last Post: Gordon
  Machining for Aluminum Bronze wire flame spray iwan-sedaryawan 3 8,003 01-12-2011, 11:47 AM
Last Post: iwan-sedaryawan
  Flame spray aluminuim WULF 4 5,948 02-06-2010, 10:02 AM
Last Post: WULF



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd