Threaded Mode | Linear Mode

Iwan Sedaryawan CA · 12-07-2016, 02:11 AM

dear all.
if anyone has the experiences Ship Propeller shaft repair by flame spray in the cones area, is this recommended by the authority of marine mechanical board or others bodies ?

thanks ad regards
iwan sedaryawan / sedaryawan@ciptaagung.com

Stephen Booth · 12-09-2016, 04:56 AM

Hi Dr. Iwan hope you are well?

What is the this component called the "cones area"?

Surely all critical repairs are subject to Marine Authorities certification.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	YSZ thermal Spraying by HVOF and Flame	mgbaca1a	2	163	09-24-2018 08:57 PM Last Post: mgbaca1a
	Application advantages of flame wire vs arc wire	velocity	1	285	07-03-2018 09:53 AM Last Post: Stephen Booth
	Flame spray guns 5P, 5PII, Type N	Hector Monjardin	1	1,300	11-17-2016 10:35 PM Last Post: mgbaca
	MCrAlY on steel for general repair	MVagusta	2	1,510	08-05-2016 10:06 AM Last Post: Vig
	Build up with Powder Flame Spray	Met.Eng.	8	6,950	05-30-2016 12:08 PM Last Post: Gordon
	Plunger Repair with WC coating	sal	8	3,648	04-26-2016 10:54 PM Last Post: pakalano
	Poor flame with Ni-based metallic powder - HVOF process	Roy	2	2,091	02-26-2016 12:30 AM Last Post: Roy
	Repair of base material defect after HVOF Coating	Pranab_hvof	1	1,984	06-20-2015 06:45 PM Last Post: Johnny_Blaze
	sulzer (metco) repair book	sal	0	1,431	04-12-2015 04:53 AM Last Post: sal
	Wire Flame spray and Twin Arc spraying	wtaz	1	1,970	03-30-2015 09:41 PM Last Post: loriolo
	Flame spraying copper to aluminum	Steamhammer	2	2,630	03-23-2015 05:32 PM Last Post: djewell
	Technology of Flame Spray -old and new	Boris Eizner	0	1,537	01-29-2015 10:04 AM Last Post: Boris Eizner
	HVOF alternative to Detonation flame method	texnicar	7	3,999	12-23-2014 12:52 PM Last Post: remistudio
	acetylene flow limits for flame spray metco 6c	chromalloymachi112	1	2,090	12-04-2014 12:18 AM Last Post: Met.Eng.
	Lathe Bed Scratch repair	shantanu	5	4,726	11-20-2014 10:11 PM Last Post: loriolo