Machining for Aluminum Bronze wire flame spray
01-08-2011, 02:05 PM,
#1
Machining for Aluminum Bronze wire flame spray
Parameter for machining of spray Al Bronze coating by wire flame spray

Dear all,
Happy New Year 2011...
Please let us know the parameter for machining of spray Al Bronze coating by wire flame spray, since we have sprayed using Brass wire and the result so many porousity, tried to use al-bronze, if anyone in this group has ever been tried this material ?
Thanks in advance ....
Thanks & Regards,
Iwan Sedaryawan - Website : https://www.ciptaagung.com
Happy0193
Reply
01-08-2011, 06:18 PM,
#2
RE: Machining for Aluminum Bronze wire flame spray
happy new year to you all, but I did not have an answer yet, I will try to get it for you.
Reply
01-12-2011, 02:17 AM,
#3
RE: Machining for Aluminum Bronze wire flame spray
the al bronze coating is porous from flame spray wire.. if you have to use flame spray you can try metco 445 powder. for machining .010 cuts for rough cutting and .002 finish cutting should be good. It seems to turn out better with endmills.
Reply
01-12-2011, 11:47 AM,
#4
RE: Machining for Aluminum Bronze wire flame spray
(01-12-2011, 02:17 AM)kschewe Wrote: the al bronze coating is porous from flame spray wire.. if you have to use flame spray you can try metco 445 powder. for machining .010 cuts for rough cutting and .002 finish cutting should be good. It seems to turn out better with endmills.

I tried to use arc-spray and the porous not as many as flame one, using RIMA C13 wire, thanks for your advise...
Thanks & Regards,
Iwan Sedaryawan - Website : https://www.ciptaagung.com
Happy0193
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Staring procedure for 6p-II flame spray mgbaca1 0 146 01-23-2024, 08:11 PM
Last Post: mgbaca1
  Assembling a second-hand zinc flame spray setup? Gasket 6 1,167 01-22-2024, 12:09 PM
Last Post: MarkDattilo
  Machining of thermal sprayed coatings ServiceTech 4 9,521 08-14-2023, 09:00 PM
Last Post: J!m
  Flame spray parameters TurbineRepair 12 21,763 12-10-2022, 05:27 AM
Last Post: SakshiVerma
  Colmonoy Coating Machining Danmarco 0 1,557 01-23-2021, 02:05 AM
Last Post: Danmarco
  HVOF coating on bronze bearing housing demionkrishan 4 2,902 01-16-2020, 09:43 AM
Last Post: demionkrishan
  Oxy-fuel wire spray gun questions hje 5 4,015 01-26-2019, 05:58 PM
Last Post: plasmajet1990
  Application advantages of flame wire vs arc wire velocity 1 2,342 07-03-2018, 09:53 AM
Last Post: Stephen Booth
  MO wire spray parameter for 3GF kim jong hun 2 3,106 04-29-2018, 01:00 PM
Last Post: kim jong hun
  Propeller shaft repair by flame spray in the cones area Iwan Sedaryawan CA 1 3,128 12-09-2016, 04:56 AM
Last Post: Stephen Booth
  Flame spray guns 5P, 5PII, Type N Hector Monjardin 1 3,808 11-17-2016, 10:35 PM
Last Post: mgbaca
  Build up with Powder Flame Spray Met.Eng. 8 10,593 05-30-2016, 12:08 PM
Last Post: Gordon
  Wire Flame spray and Twin Arc spraying wtaz 1 4,190 03-30-2015, 09:41 PM
Last Post: loriolo
  Flame spraying copper to aluminum Steamhammer 2 5,053 03-23-2015, 05:32 PM
Last Post: djewell
  Technology of Flame Spray -old and new Boris Eizner 0 3,319 01-29-2015, 10:04 AM
Last Post: Boris Eizner



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd