Advantages of forced cooling of components during Plasma Spray Process -- Reg
09-13-2011, 07:49 AM,
Advantages of forced cooling of components during Plasma Spray Process -- Reg
Respected Forum Members,

Please any one share experience regarding possible heat removal (Temperature drop) on component during plasma spray process by providing forced air cooling through compressed dry air of 2 bar pressure for 7% Yitria Stabilized Zirconia Coating on Medium size component.


09-19-2011, 05:40 PM,
RE: Advantages of forced cooling of components during Plasma Spray Process -- Reg
Hi Sreenivas

That will depend very much how, where and how much

Are we taking general air blast cooling of part as a whole or more localised cooling

Generally the more localised the air blast relative to the point of spray impact the more efficient the heat removal ie. remove some of the heat before it has chance to soak in to part.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Nitrogen Cooling Neufeld 2 1,183 08-20-2019, 11:40 AM
Last Post: loriolo
  Helium Alternative for Plasma Spray Abilash 2 1,491 02-18-2019, 03:51 PM
Last Post: Lemster68
  Plasma Spray Masking Tape achmadarifudinh 2 1,469 09-06-2018, 02:48 AM
Last Post: achmadarifudinh
  Application advantages of flame wire vs arc wire velocity 1 1,319 07-03-2018, 09:53 AM
Last Post: Stephen Booth
  Arc Spray and then Plasma spray? Is this common? cancun555 2 1,858 06-23-2017, 07:11 AM
Last Post: loriolo
  Inert gas shrouded plasma spray MartyMc 1 2,713 06-23-2016, 11:08 PM
Last Post: loriolo
  Rotating Plasma Spray Gun MarkL 2 3,164 06-08-2016, 06:52 AM
Last Post: MarkL
  Metallicity of Plasma spray plzc126330 2 2,777 12-17-2015, 10:34 AM
Last Post: loriolo
  Reg: Cooling process. Dileep 2 3,169 10-16-2015, 01:05 AM
Last Post: Johnny_Blaze
  Plasma spray using Kerblack Hector Monjardin 4 3,565 07-30-2015, 05:43 PM
Last Post: loriolo
  Water Plasma Spray System sreenuvundela 0 2,350 03-12-2014, 06:26 AM
Last Post: sreenuvundela
  Thermal spray coating in Process Industries Chakraborty_P 8 8,388 08-29-2012, 02:43 AM
Last Post: ehasan
  hvof cooling kschewe 0 2,603 07-16-2012, 06:10 AM
Last Post: kschewe
  Process Gasses Purity Impact towards Plasma Spray Process, equipment or outcome Alexangel1226 8 10,460 06-12-2012, 02:46 PM
Last Post: Eric Tolliver
  3MB gun air cooling Azraf Saip 1 2,918 10-21-2011, 09:15 PM
Last Post: LEN WOOD

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd