Suggest on coating bond strength tester
08-01-2012, 03:38 PM,
Suggest on coating bond strength tester
We need to test the coating bond strength, which might exceed 6000 psi. Please suggest me a good, easy to use tension bond strength tester. I contacted DFD Instruments for their AT101E/80kN tester, but the price is too high. I also contacted DeFelsko for their tester PosiTestAT-A, which is not expensive. But I do not know if it is good enough for testing our ceramic coatings. Please advise.[/size][/font]
08-13-2012, 06:52 PM,
RE: Suggest on coating bond strength tester
I am also looking for a tensile tester but to test higher bond strength upto 13000PSI. Mind you the blank coupon with glue can have higher bond strength than most plasma sprayed coatings.
08-14-2012, 10:38 AM,
RE: Suggest on coating bond strength tester
why not try Elcometer Pull Off Test ?? elcometer 106 ? up to 30 MPa...hope are of some helps..
Thanks & Regards,
Iwan Sedaryawan - Website :
08-14-2012, 03:10 PM,
RE: Suggest on coating bond strength tester
Thank you, Iwan, for your advice. I will call Elcometer.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Info needed on Bond Strength for Thermal Spray powders hereticgame 1 2,454 10-10-2017, 11:39 AM
Last Post: Vadim Verlotski
  95Ni 5Al bond strength alaskangrown 1 2,909 01-15-2016, 05:09 PM
Last Post: loriolo
  HVOF T800 Tensile Bond Strength issue wgg237 2 4,559 03-05-2015, 01:52 AM
Last Post: wgg237
Shocked Hard Crome Plating Bond strength Met.Eng. 4 6,331 02-24-2015, 02:37 AM
Last Post: Simon Kim
  Arc Wire Spraying Bond Strength wtaz 4 5,214 12-04-2014, 12:02 AM
Last Post: wtaz
  Abradable Coating-Bond Strength rayudugirish 9 12,614 01-06-2014, 09:55 PM
Last Post: derek
  Vickers Hardness Tester ruudlam 0 3,828 09-13-2013, 02:22 PM
Last Post: ruudlam
  Question on bond strength. Ghostwheel 4 5,080 10-13-2012, 10:03 AM
Last Post: kschewe
  Need help to suggest coating material operator 5 5,739 12-28-2011, 09:53 AM
Last Post: Guna
Question How do reduce tensile strength of coating Metco 52C-NS? Christine 24 26,061 10-27-2011, 03:51 PM
Last Post: Gordon
  Hardness tester 2 Terry 1 4,252 07-21-2011, 03:06 PM
Last Post: djewell
  hardness tester Arturas 1 4,655 07-17-2011, 06:18 PM
Last Post: Gordon
  Surface preparation and its effect on fatigue life and bond strength WMW 4 7,654 06-29-2010, 08:41 AM
Last Post: drramc
  95/5 Bond Strength George Brown 1 3,686 06-02-2010, 09:33 AM
Last Post: Gordon
  Dating gun barrel with hardness tester? Possible? larry55 2 5,878 11-06-2009, 05:39 PM
Last Post: larry55

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd