Crankshaft bearing coating
11-09-2015, 08:23 PM,
#1
Crankshaft bearing coating
Hi everyone,

Which arc spray wires is the best choice to apply crankshat bearing area ?

The crackshaft bearing hardness is 180 HB and have oil grooves, I read some old post in SEF and read some doc , usually the best choice is 13C steel ,SM2. But i see some metco catalog , Sprasteel 11 is usually work well if the bearing ares have oil grooves.

Anybody give some advice, Wires, sealings and important things about crankshat coatings

Thanks
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Arc spray or HVOF for bearing of turbine generator shaft Youssef 0 563 06-15-2020, 06:08 AM
Last Post: Youssef
  HVOF coating on bronze bearing housing demionkrishan 4 1,097 01-16-2020, 09:43 AM
Last Post: demionkrishan
  Roller bearing KevGarty 2 1,638 02-07-2018, 09:43 PM
Last Post: demionkrishan
  Coating on shrink fit bearing journals shantanu 1 2,420 01-27-2014, 07:44 AM
Last Post: Vijay Deshpande
  HVOF SPRAY ON EN31 BEARING STEEL SHAFTS Zanitech 1 3,500 10-18-2013, 11:49 AM
Last Post: Stephen Booth
  Roller Bearing coating sal 6 5,076 08-03-2013, 10:23 AM
Last Post: loriolo
  ARC Spray for Bearing seat rebuilding shantanu 3 4,660 05-15-2013, 06:51 PM
Last Post: shantanu
  Coating on bearing seating area raviswanadha 4 5,382 09-28-2011, 01:59 PM
Last Post: djewell
  Tests for crankshaft coating? jdew1920 6 7,696 06-15-2008, 03:22 PM
Last Post: Gordon
  Diamalloy 1008 H.D. Crankshaft Repair HVoilF 4 10,136 04-12-2008, 11:08 AM
Last Post: hvofhamid



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd