YSZ thermal Spraying by HVOF and Flame
09-23-2018, 06:21 PM,
#1
YSZ thermal Spraying by HVOF and Flame
Dear Collegues
We planning to spray fine-grain YSZ powder (Metco 6700) using Hipo Jet 2700 and 6P-II torches. Do You have any expirience and/or parameters for this processes?
Reply
09-24-2018, 06:24 AM,
#2
RE: YSZ thermal Spraying by HVOF and Flame
(09-23-2018, 06:21 PM)mgbaca1a Wrote: Dear Collegues
We planning to spray fine-grain YSZ powder (Metco 6700) using Hipo Jet 2700 and 6P-II torches. Do You have any expirience and/or parameters for this processes?
For YSZ you need the plasma spraying. It will work with 6P-II as well, but with a very low DE (large powder losses make flame spraying of YSZ not economical). With HVOF (Hipo Jet 2700) you can not create a YSZ layer at all.
Buy a used plasma system, which is not much more expensive than flame spraying.
Reply
09-24-2018, 08:57 PM,
#3
RE: YSZ thermal Spraying by HVOF and Flame
Thank You for information
We have plasma system. We planning to make scientific research for possibility of deposition using other thermal spray processe. We planning to use fine-grain powders like metco 67000 or smaller grains. Do You have parameters for 6P-II?


Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Spark Issue on DJ2600 HVOF Flame xxxxmgulkokan 3 2,111 08-31-2022, 03:15 PM
Last Post: Red Baron
  Compare between Arc-Spraying and HVOF reyesryder 1 1,969 10-20-2021, 06:41 AM
Last Post: Vadim Verlotski
  Surface corrosion when HVOF spraying vcduramais 4 2,092 08-20-2021, 11:25 AM
Last Post: vcduramais
  Green flame in HVOF hydrogen - oxygen combustion JeroenB 3 2,144 05-07-2021, 01:24 PM
Last Post: JeroenB
  Hvof spraying on top of arc spray velocity 7 4,757 07-04-2019, 06:03 PM
Last Post: velocity
  HVOF/HVAF Thermal Spraying connoramcguigan 0 2,506 11-13-2018, 05:13 PM
Last Post: connoramcguigan
  Poor flame with Ni-based metallic powder - HVOF process Roy 2 4,594 02-26-2016, 12:30 AM
Last Post: Roy
Question High-temperature polymers (PEEK) spraying by HVOF Stanislav 0 3,820 02-19-2016, 11:53 AM
Last Post: Stanislav
  Wire Flame spray and Twin Arc spraying wtaz 1 4,190 03-30-2015, 09:41 PM
Last Post: loriolo
  Flame spraying copper to aluminum Steamhammer 2 5,054 03-23-2015, 05:32 PM
Last Post: djewell
Question thermal spraying simulation software ??? vladutzu86 4 9,482 02-08-2015, 05:29 PM
Last Post: kyawkyaw
  HVOF alternative to Detonation flame method texnicar 7 7,436 12-23-2014, 12:52 PM
Last Post: remistudio
  Thermal Spraying of Silica Nadiir 2 4,958 11-29-2014, 10:58 AM
Last Post: Nadiir
  Diamater of HVOF spraying Gun? hustzc 0 2,692 11-12-2014, 09:52 AM
Last Post: hustzc
  hvof sleeve spraying Brent 4 5,837 03-06-2013, 07:41 AM
Last Post: Brent



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd