Threaded Mode | Linear Mode

vladutzu86 · 07-14-2011, 09:52 AM

I am new here, i just registered. Big Grin

I am a Ph.D. student from Romania, and my thesis subject is thermal spraying. I am very glad that there is a forum like this wich can be a very good source. I would like to ask you if you know some softwares that can simulate the thermal spraying process. I have the "jet&poudres" software, but it gives me some errors , and it's limited at plasma spraying process. Thank you ! Have a nice day !

***Gordon*** · 07-16-2011, 01:57 PM

Hi vladutzu86

Sign0016

to the Surface Engineering Forum.

I had a play with "jet&poudres" software some time ago, though interesting and thought provoking didn't personally find it useful in a practical sense for developing coatings. Sorry, no knowledge or experience of other thermal spraying simulation software, though I'm sure there must be some out there.

***Gordon*** · 07-16-2011, 02:19 PM

Hi to all who may be interested.

Jets&Poudres for Windows 98 / ME / 2000 / XP plasma spray assistant This software is free Smile

vladutzu86 · 07-17-2011, 05:05 PM

Thank you sir for your reply !

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	How to reduce the intersplat boundaries in thermal spraying	hustzc	3	250	05-16-2012 01:30 AM Last Post: Gordon
	Arc spraying: air quality requirements	Stefan	2	696	11-24-2011 10:19 AM Last Post: Stefan
	Thermal Spraying Plastics	PPSABoyce	2	836	11-10-2011 01:06 PM Last Post: MichiganMan
	Porosity Problems Spraying Metco 72F-NS / Wc-114	J_rock	9	5,416	10-25-2011 07:58 PM Last Post: Chico
	How to thermal-spraying with very large area	hustzc	3	971	08-25-2011 01:21 PM Last Post: LEN WOOD
	CASPSP software	vladutzu86	0	432	07-26-2011 05:15 PM Last Post: vladutzu86
	Temperature control in spraying HVOF	minh_8888	1	643	06-21-2011 02:40 PM Last Post: Metallurgy_eng
	Surface preparation before spraying HVOF	minh_8888	4	1,485	06-20-2011 12:18 PM Last Post: Metallurgy_eng
	Spraying on Magnesium substrate	Madila Awalini	9	1,487	07-05-2010 04:01 AM Last Post: Madila Awalini
	Cold Spraying porosity	attin	4	1,243	03-09-2010 04:30 PM Last Post: drramc
	Preheating silicon bars for arc spraying	banquo	2	1,130	03-08-2010 11:07 AM Last Post: banquo
	Cold spraying titanium nitride	AnthonyE	4	2,187	11-13-2009 11:26 AM Last Post: SimonH
	process for spraying Aluminum	drbooba1	7	3,017	11-12-2009 04:54 AM Last Post: drbooba1
	HVOF Small-ID Spraying	ykang	10	3,119	10-27-2009 04:37 PM Last Post: k09
	Spraying of Magnesium (Mg alloys) powder	Madila	4	2,219	05-20-2009 08:04 PM Last Post: Gordon