How to thermal-spraying with very large area
08-24-2011, 01:50 AM,
#1
How to thermal-spraying with very large area
Hi, Dear all;

Could someone sent me some pics or equipment photos on how to spraying materials on ship such as deck? Is there X-Y-axis to support the thermal spraying Gun?

If any, please sent me a email: hustzc@gmail.com
or upload.

Thanks very much.
Reply
08-24-2011, 09:50 AM,
#2
RE: How to thermal-spraying with very large area
(08-24-2011, 01:50 AM)hustzc Wrote: Hi, Dear all;

Could someone sent me some pics or equipment photos on how to spraying materials on ship such as deck? Is there X-Y-axis to support the thermal spraying Gun?

If any, please sent me a email: hustzc@gmail.com
or upload.

Thanks very much.

We have done TSA on ship decks manually. the problem with automation is that decks (other than aircraft carriers) are not "regular", with hatches, vents, piping, access ways etc. Automation would need frequent reprogramming and moving. You need a fast gun and experienced sprayers.
Reply
08-25-2011, 08:00 AM,
#3
RE: How to thermal-spraying with very large area
an experienced sprayer with a nice portable wire arc system would be my first choice.
Reply
08-25-2011, 01:21 PM,
#4
RE: How to thermal-spraying with very large area
Totally agree with wrjordan as far as 'irregularities' are concerned but scanners can be engineered that maintain a defined standoff. That is if the deck were fairly consistent and mostly free of obstructions – aircraft carriers and the like. I understand that there’s a few in China now?
Hand spraying large deck/ground areas isn't great for your vertebrae.

I recommend an ultra long reach push/pull system that doesn’t spit/misbehave in any orientation or position. We have the perfect/ideal systems.Cool
Len Wood
METAL MONSTER LTD
BIGGER BETTER FASTER MORE!
Ph: +64 9 4730705
Fax: +64 9 4730706
Email:: len@metal-monster.com
www.metal-monster.com
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Pencil Ball Mill Shaft- Journal Bearing Area HVOF Coating Issue tobjung 0 745 02-02-2023, 06:44 PM
Last Post: tobjung
  HVOF/HVAF Thermal Spraying connoramcguigan 0 2,517 11-13-2018, 05:13 PM
Last Post: connoramcguigan
  YSZ thermal Spraying by HVOF and Flame mgbaca1a 2 2,649 09-24-2018, 08:57 PM
Last Post: mgbaca1a
  Propeller shaft repair by flame spray in the cones area Iwan Sedaryawan CA 1 3,139 12-09-2016, 04:56 AM
Last Post: Stephen Booth
Question thermal spraying simulation software ??? vladutzu86 4 9,490 02-08-2015, 05:29 PM
Last Post: kyawkyaw
  Thermal Spraying of Silica Nadiir 2 4,968 11-29-2014, 10:58 AM
Last Post: Nadiir
Rolleyes Calculate powder weight needed to spray surface area Zacadoom 2 8,729 11-10-2014, 02:58 PM
Last Post: Zacadoom
  How to define amorphous area and crystalline area from XRD peak??? fahad03092 1 4,776 05-19-2012, 01:39 PM
Last Post: fahad03092
  How to reduce the intersplat boundaries in thermal spraying hustzc 3 5,963 05-16-2012, 01:30 AM
Last Post: Gordon
  Thermal Spraying Plastics PPSABoyce 2 9,421 11-10-2011, 01:06 PM
Last Post: MichiganMan
  Coating on bearing seating area raviswanadha 4 6,985 09-28-2011, 01:59 PM
Last Post: djewell
  Coating options for large carbon steel tank Jimmy D. 9 12,965 12-15-2010, 07:50 AM
Last Post: ives
  learner on thermal spraying graham 4 8,016 12-29-2008, 04:29 PM
Last Post: graham
  spray area and material loss basakglkn 3 6,513 04-28-2008, 12:48 PM
Last Post: Gordon
  Thermal spraying copper parts DVB 6 10,812 03-19-2008, 04:50 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd