High-temperature polymers (PEEK) spraying by HVOF
02-19-2016, 11:53 AM, (This post was last modified: 02-20-2016, 07:16 AM by Stanislav.)
#1
Question  High-temperature polymers (PEEK) spraying by HVOF
Hello,
I had read the article, where was about successfully spaying of PEEK (polyetheretherketone, polymer of Victrex production) by HVOF (K2 Gun). At the last week I tried to do the same, was using parameters with low velocity and temperature of stream, but coating was horrible burned. The spray parameters that I used was: oxygen 17 L/h, kerosene 600 L/min, powder supply 15g/min.
I think the problem of polymer overheating is in too long time interaction of polymer powder with high temperature of stream.
Has somebody tried to spray high-temperature polymers by using HVOF guns (K2/Diamond Jet/Other)? May be you know some «cheats» or appropriate parameters?
P.S. I have some idea that consists in changing of injection method: radial supply of powder from the side of top of nozzle (like it doing in plasma).

Any replies or tips would be greatly appreciated.

Thank you.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Compare between Arc-Spraying and HVOF reyesryder 1 1,969 10-20-2021, 06:41 AM
Last Post: Vadim Verlotski
  Surface corrosion when HVOF spraying vcduramais 4 2,092 08-20-2021, 11:25 AM
Last Post: vcduramais
  interpass temperature macleod-s 1 2,034 08-11-2019, 04:15 PM
Last Post: velocity
  Hvof spraying on top of arc spray velocity 7 4,757 07-04-2019, 06:03 PM
Last Post: velocity
  High temperature sealers for food contact pcdmt 3 3,949 04-25-2019, 12:28 PM
Last Post: loriolo
  HVOF/HVAF Thermal Spraying connoramcguigan 0 2,505 11-13-2018, 05:13 PM
Last Post: connoramcguigan
  YSZ thermal Spraying by HVOF and Flame mgbaca1a 2 2,637 09-24-2018, 08:57 PM
Last Post: mgbaca1a
  Polymers plasmajet1990 1 2,984 05-24-2016, 02:13 PM
Last Post: Stanislav
  5220 Gun Temperature RV_DMG 6 6,392 11-17-2015, 12:45 PM
Last Post: Joris Kraak
  Diamater of HVOF spraying Gun? hustzc 0 2,692 11-12-2014, 09:52 AM
Last Post: hustzc
  hvof sleeve spraying Brent 4 5,836 03-06-2013, 07:41 AM
Last Post: Brent
  metalization of solar high temperature absorber pipes nikoslarissis 5 7,210 01-03-2012, 04:57 AM
Last Post: sreenuvundela
  High Pressure Piston Rods HVOF coatings HVoilF 14 24,448 12-24-2011, 10:20 AM
Last Post: k09
  high temp during hvof coating ehsan 6 12,904 07-05-2011, 03:25 PM
Last Post: Justin
  Temperature control in spraying HVOF minh_8888 1 4,855 06-21-2011, 02:40 PM
Last Post: Met.Eng.



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd