T800 parameter
03-07-2019, 01:48 AM,
#1
T800 parameter
Hi All;

Is there anyone willing to share an aerospace quality parameter for Metco 68F-NS-1 sprayed with the F4 plasma gun? I'm looking for a parameter with less than 180μin roughness and with HR15N in excess of 82 when sprayed from .009 - .013" total thickness.

I have tried METCO parameters, but the effect is not good.

Thanks in advance.
Reply
03-14-2019, 09:42 AM,
#2
RE: T800 parameter
Dear Ping Cheng
Many years ago I must do process T800 qualification, and it was very hard to accomplish with GE SPEC F50TF45CLB specification with 68F NS-1, we try with other OEM powders like Pac 800, FST M-499 and CO111, and the result was better, some time OEM in order to win money, sell powders with too much fines, and you pay for powders that goes on the air instead to do a coating
Best regards
Luigi
Reply
03-14-2019, 09:56 AM,
#3
RE: T800 parameter
(03-14-2019, 09:42 AM)loriolo Wrote: Dear Ping Cheng
Many years ago I must do process T800 qualification, and it was very hard to accomplish with GE SPEC F50TF45CLB specification with 68F NS-1, we try with other OEM powders like Pac 800, FST M-499 and CO111, and the result was better, some time OEM in order to win money, sell powders with too much fines, and you pay for powders that goes on the air instead to do a coating

dear Luigi

I will discuss it with my supervisor.
Thank you for your help.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  parameter DJ GUN 2700 gito 0 707 03-26-2019, 03:28 AM
Last Post: gito
  Parameter Stellite 6 HVOF DJ2600 achmadarifudinh 0 1,057 12-07-2018, 01:36 AM
Last Post: achmadarifudinh
  MO wire spray parameter for 3GF kim jong hun 2 1,494 04-29-2018, 01:00 PM
Last Post: kim jong hun
  HVOF JK parameters for T800 plyer 8 10,990 07-27-2017, 01:41 PM
Last Post: technovel
  T800 coating delamination alvliew 5 3,295 05-05-2017, 02:54 AM
Last Post: KevinS
  601NS single cathode parameter J!m 1 1,464 08-15-2016, 01:58 PM
Last Post: plasmajet1990
  Qualifying T800 to F50TF45 Class A mmgerrie 4 4,308 12-23-2015, 03:38 AM
Last Post: alvliew
  HVOF parameter for WCCo + CoNiCrAlY Guna 2 3,651 10-09-2012, 06:54 PM
Last Post: Spraytube
  problems with T800 HVOF stokee 22 33,701 08-13-2012, 10:08 AM
Last Post: wgg237
  HVAF and T800 mark ainsley 5 6,144 03-30-2012, 09:50 PM
Last Post: djewell
  W121 coating - Parameter Problem ir_minja 1 4,288 02-21-2011, 07:25 PM
Last Post: Gordon
  Silvaloy 13 parameter. shabisyed 19 18,523 07-08-2009, 07:51 PM
Last Post: Gordon
  HVOF T800 removal finnie 2 9,123 12-16-2008, 01:08 PM
Last Post: kurtecard
  T800 critque Intel55 3 7,056 09-05-2008, 08:37 PM
Last Post: Intel55
Rolleyes Etching solution for T800 Phdstudent 2 5,861 04-15-2008, 04:31 PM
Last Post: Phdstudent



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd