HVOF JK parameters for T800

[plyer]

Hi everyone,

It is my turn to handle the T800 baby now. Does anybody have any suggestion on the parameters for JK gun? I am going to spray Metco Diamalloy 3001 and Lineage LA-T800.

Thanks,

[Gordon]

Hi Plyer

Unless someone can recommend specific parameters for these powders through your JK gun to whatever specification your working to, I would start by using parameters recommended for the praxair [edit: should be Deloro Stellite not Praxair) JK T800 powders. These parameters may not give you exactly the coatings you want, but should give a reasonable starting point/base line to work from.

Good luck

[plyer]

Thanks Gordon,

Can you please tell me more about the parameters for JK T800? We bought the equipment second hand so can not get good technical support from the gun supplier.

Plyer

(09-29-2009 03:20 PM)Gordon Wrote:  Hi Plyer

Unless someone can recommend specific parameters for these powders through your JK gun to whatever specification your working to, I would start by using parameters recommended for the praxair/JK T800 powders. These parameters may not give you exactly the coatings you want, but should give a reasonable starting point/base line to work from.

Good luck

[Gordon]

Hi Plyer

Sorry, confusing JK with JP

Should have said Deloro Stellite JK powders like JK 558P/JK7580 or JK558H.

Sorry, don't have the specific recommended parameter settings, hopefully one of our other members will help out.

[LEN WOOD]

Hello Plyer,

Send me a PM with your email address and I'll send you a Technical Data sheet on the Tribaloy T-800 through the JetKote.

Cheers

[wgg237]

(09-30-2009 09:45 AM)LEN WOOD Wrote:  Hello Plyer,

Send me a PM with your email address and I'll send you a Technical Data sheet on the Tribaloy T-800 through the JetKote.

Cheers

Hi Wood,

Could you share that Technical Data sheet on the Tribaloy T800 though the jetKote to me? I have some problems for T800 HVOF process.

My email address is: wgg237@126.com

Many thanks!
wgg237

[GMA thermal spray systems]

Hello I have all jetkote spray parameter
yves.plusquin@skynet.be

[wgg237]

(08-02-2013 03:45 PM)GMA thermal spray systems Wrote:  Hello I have all jetkote spray parameter
yves.plusquin@skynet.be

Hi,

Appreciate that you can share them to me...
My email: wgg237@126.com

Many thanks,
Roger