HVOF parameter for WCCo + CoNiCrAlY
09-24-2012, 02:02 AM,
#1
HVOF parameter for WCCo + CoNiCrAlY
Hi Forum members,
I have an air cooled SM HVOF system where we use a blended powder with composition of 50%WC12Co + 50% CiNiCrAlY and the flow meter is set as Propane 41, Oxygen 43 and air 55. Now I'd like to blend the powders by myself using 50% AMDRY 9954 + 50% SM 5812 and would like hear your inputs on how to arrive at the flow meter settings.

Thank you
S.Guna
Reply
09-24-2012, 05:33 PM,
#2
RE: HVOF parameter for WCCo + CoNiCrAlY
Hi Guna

I would spray samples to the exactly the same parameters and then compare coating microstructure, hardness, deposit efficiency etc with previous coatings. If optimisation is then required you will need to do some coating development trials, trying new spraying parameters or powder blending modifications.
Reply
10-09-2012, 06:54 PM,
#3
RE: HVOF parameter for WCCo + CoNiCrAlY
Hi,

My starting parameters would be:

O² : 10,3 bar 253 l/mn (~40 FMR)
Propane : 6.9 bar 77 l/mn(~40 FMR)
Air : 6.9 bar 376 l/mn (48 FMR)

Carrier : 12.5 l/mn spray rate : 38 g/mn spray distance :9 in

Would be interesting to see the micro structure

regards
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  F4 plasma parameter Liamm 1 423 12-22-2023, 05:05 PM
Last Post: ServiceTech
  SG-100 PLasma Parameter Met.Eng. 0 592 07-30-2023, 05:26 PM
Last Post: Met.Eng.
Star HVOF WCCo on Chilled Cast Iron(55HRC) tobjung 1 2,079 03-04-2021, 11:16 AM
Last Post: Vadim Verlotski
  Rochelle Salt stripping of WCCo AYoungEngineer 0 3,034 07-18-2019, 12:35 AM
Last Post: AYoungEngineer
  parameter DJ GUN 2700 gito 0 2,174 03-26-2019, 03:28 AM
Last Post: gito
  T800 parameter Ping Cheng 2 3,408 03-14-2019, 09:56 AM
Last Post: Ping Cheng
  Parameter Stellite 6 HVOF DJ2600 achmadarifudinh 0 2,624 12-07-2018, 01:36 AM
Last Post: achmadarifudinh
  MO wire spray parameter for 3GF kim jong hun 2 3,106 04-29-2018, 01:00 PM
Last Post: kim jong hun
  Problem solved Metco™ 2042 - CoNiCrAlY-BN / Polyester Abradable CSchwie 5 15,689 06-01-2017, 09:03 AM
Last Post: Tribologist_CH
  601NS single cathode parameter J!m 1 2,864 08-15-2016, 01:58 PM
Last Post: plasmajet1990
  W121 coating - Parameter Problem ir_minja 1 5,833 02-21-2011, 07:25 PM
Last Post: Gordon
  Silvaloy 13 parameter. shabisyed 19 22,623 07-08-2009, 07:51 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd