Member Survey

[Gordon]

Hi Maxwell

to the Surface Engineering Forum.

[Alexangel1226]

Hi Gordan and everyone in this forum,

It's been sometime I did not log in due to switch of job function and have been real busy.
Graduated with B.S of Chemical Engineering and I have been working as a process & development engineer for Aviation industry for several years doing component repair. We are the engine OEM. Prior to that also a thermal spray engineer for a local MNC specializing in surface treatment for power turbine, electronic equipment for semicon industry. Recently I am the Lean Six sigma Black Belt specializing in process improvement in contractual management for engine overhaul shops.

Nice to be back after 8 months and glad to see more and more member joining and active discussion continues.
Great Job.

Alex

[Gordon]

Hi Alex

Glad to see you back, we were missing you.

[Yukawa]

Hi! My name is Nemanja and I am the physic student. I am involved in some aluminium testing research.

[larry55]

Hello, my name is Larry, My expertise is amateur gunsmithing of AR15's.

[cantause]

Hi everyone!

I'm François, I'm studying engineering in Belgium, it's my second year so I don't already have specific skills. I'd like to get a master's degree in aerodynamics or in materials science, actually both but I'll see when I'll be there

I like restoring old motorcycles and engine tuning as a hobby, I like to understand what I'm doing so I'm interested in many different fields of engineering.

I'm sorry for my mistakes in English, I'll try to improve it in the future!

Bye!

[nettrade]

Hi,

I am working in a manufacturer who produce the parts for the coating line. We are good at the parts for Galvanizing line and Al-Zn-Si coating line.
The material of the parts could be SS316L, Stellite, HY-1B and etc.

[Jens Ekelund]

Hello,

My name is Jens Ekelund and i've been workin as a thermal spray operator for many years in is now working as production manager in my company here in Sweden. All the operators in my company is cetified (ETS) and we are really working on keeping up when it comes to new technology and spraying materials.

Ive got lots of experience when it comes to plasma spraying, arc spraying and flamespraying and have been using lots of different equipment from sulzer metco and castolin / tafa.

At the moment we have 2 Plasma spray equipments (I have ordered a third one just a few days ago), 4 different arc spray equipment and lots of flamespray guns (both wire and powder)

Best regards


Jens Ekelund

[Gordon]

Hi Jens

to the Surface Engineering Forum.

[garyt32]

My name is Gary and I am the primary caregiver for 9 plasma operations (Metco), all 9MB guns with 2, 7MC controllers the rest are 9MC controllers and 1 HVOF praxair unit, I thought I would jump in and join the forum. I am currently rebuilding a 8ME heat exchanger by removing all 3 hear exchangers and replacing them all with one half the size if one of them and it is still supposed to be more efficient then all three were. They only problems I face are unmelts and Porosity in my coatings, I have been doing some reading and I am going to try somethings I have found here. I was an operator back when we sprayed wire with the 5K guns and was until we got into plasma and then went into repair. If a 9m series breaks I have seen it. and repaired it. It is always amazing how my company trains the people that don't have to deal with problems.

[jaydev choudhary]

hi, i am jaydev choudhary, i read your site its very interesting and knowledge aparting, i also have few queries about this subject,
can you tell me about coating details of following rolls used in paper industry-
applicator roll
lead in roll
lead out roll
wire drive roll.

i urgently need all these coating details pls help me.

thanks.

[jaydev choudhary]

(04-09-2010 04:40 AM)jaydev choudhary Wrote:  hi, i am jaydev choudhary, i read your site its very interesting and knowledge aparting, i also have few queries about this subject,
can you tell me about coating details of following rolls used in paper industry-
applicator roll
lead in roll
lead out roll
wire drive roll.

i urgently need all these coating details pls help me.

thanks.

[Gordon]

Hi Jaydev Choudhary

to the Surface Engineering Forum.

Could you please make new threads in the forum for your queries, as discussing them here would be off topic in an already large thread.

[jaydev choudhary]

(04-10-2010 02:45 PM)Gordon Wrote:  Hi Jaydev Choudhary

to the Surface Engineering Forum.

Could you please make new threads in the forum for your queries, as discussing them here would be off topic in an already large thread.

Dear Gordon, thanks for your response but i dint found option to make new thread! how to do it could you please guide me?

[modey3]

Hello,

I finally found a message-board related to tribology! My name is Luke Autry. I'm a PhD student in Materials Engineering from CT. I'm studying the impact of ion implantation on the galling resistance of materials.

[Gordon]

Hi Modey3

to the Surface Engineering Forum.

[warx]

Hi everyone
I'm a coating shop owner , in Brazil, mechanical engineer,running HVOF,PLASMA, AND FLAME SPRAY, and I'm glad that Gordon put this forum online ,allowing us to share very good information about surface engineering.

[Gordon]

Hi warx

to the Surface Engineering Forum.

[sebastiangt]

Hi gordon, hi everyone, my name's sebastian from Argentina and I am a student and got a gun METCO 10e to start my small business for surface treatment

regards

[Gordon]

Hi Sebastiangt

to the Surface Engineering Forum.