Member Survey

[LeeWL]

Good day everyone.

I'm a fresh graduate that has recently landed a job as a chemist in charge of formulating coatings for metal and plastics (solvent-borne and water-borne). I'm working in Multi Square Sdn. Bhd. in Malaysia (http://www.multisquare.com) which happens to be a paint manufacturing company.

It is interesting to see forums like these around. There really is too few of them. Thanks to forum like these, we can exchange knowledge and information to better equip ourselves. Thanks to Gordan, I've really gain a lot of knowledge.

Hope to be receiving guidance with everyone here and also exchanging information and knowledge.

[Gordon]

Hi LeeWL

to the Surface Engineering Forum.

[Ken]

Hi there,
I am Ken, machinist and maintenance engineer in the UK. Just stumbled across the forum whilst researching metal spray for parts reclamation.
Look forward to learning from you all.

Cheers,

Ken

[Gordon]

Hi Ken

to the Surface Engineering Forum.

[aioa]

Hi everyone,
I am a newbie in thermal spray technology..
I am from Greece and i let you know something about me:
I work in pyrogenesis (http://www.pyrogenesis-sa.gr/index_files...ge_en.htm)
I use mostly 14E Flame Spray Gun with liquid precursor for my doctorate thesis but for my job i use also HVOF,Plasma Spray and Wire Arc with powder/wire feedstock.
Thank you..

[Gordon]

Hi aioa

to the Surface Engineering Forum.

[steve]

Hi, I'm Steve and my main occupation is metallography.
I have a keen interest in coatings - plasma, aluminides etc.
This has to be the best forum available offering invaluable help.
Thanks Gordon for your commitment.

[Gordon]

Hi Steve

to the Surface Engineering Forum.

[accurate]

Good Evening Everybody,

I am Nirav from INDIA.
I have done my M.S. in Chemical Engineering from USA.
I am having my own jobshop for Thermal Spary in Ahmedabad where we are doing reclamation of worn out parts.
This foram is very very helpful and interesting.
We are setting up another big jobshop in Ahmedabad,INDIA.

[ravi_n59]

Hi I am Ravi working as application engineer for MEC in India.www.mecpl.com.I am Responsible for generating business for TS from Southern part of India.

[dcrawford]

Hello, my name is Dan Crawford and I am the owner of Control Vision Inc.

We have developed a new imaging and diagnostic system, SprayCam, specifically targeted for the Thermal Spray Industry. SprayCam is designed to be a low cost, low maintenance, easy to use and robust system for viewing and measuring particle injection distributions for Thermal Spray Processes, ensuring Reliable and Consistent Coatings. SprayCam is also a valuable tool for troubleshooting torch problems, especially in radially injected torches.

Visit our YouTube Channel for sample video.

[Gordon]

Hi Dan

to the Surface Engineering Forum.

(05-12-2009 06:58 PM)Control Vision Inc Wrote:  Hello, my name is Dan Crawford and I am the owner of Control Vision Inc.

We have developed a new imaging and diagnostic system, SprayCam, specifically targeted for the Thermal Spray Industry. SprayCam is designed to be a low cost, low maintenance, easy to use and robust system for viewing and measuring particle injection distributions for Thermal Spray Processes, ensuring Reliable and Consistent Coatings. SprayCam is also a valuable tool for troubleshooting torch problems, especially in radially injected torches.

Visit our YouTube Channel for sample video.

[TSMS]

Hi, I'm Martyn Proctor of Thermal-spray Materials & Services Ltd. I have a warehouse full of thermal spray wires, some powders & mainly 10E Spares.

Any equiries to thermalsprayuk@aol.com

[Phil Campeau]

Hello All

I have been involved with thermal spray since the early 80's, and there is always something new to learn.

Phil

[Gordon]

Hi Phil and Martyn

to the Surface Engineering Forum.

Quote:there is always something new to learn

Yes, I'm just worried I'm forgetting more stuff than I learning

[TomCarlisle]

hi everyone, im Tom, im 15 from engand and have been building & designing things since i could draw
im currently building a Small Flying aircraft, well its sort of half aircraft half hovercraft. but i was wondering what sort of motor should use for the thrusters, any ideas welcome thanks

[AYKAC]

Hi,

I am an engineer working in Thermal Spray process in an Aircraft Engine company for 10 years, dealing with problems in APS and HVOF. Good to see people having typical headaches like i have and solutions here.

Thanks,

[Gordon]

Hi TomCarlisle and AYKAC

to the Surface Engineering Forum.

[Laurent]

Hello,
I'm working in aircraft engine repair business.
We do repair Auxillary Power Units (Aircraft starters)
TS takes a huge place in APU repair as well as in our component repair process.
Always looking for good advice, though experience is there.
Thanks Laurent

[Maxwell]

Hello All

An end user and new to exotic material surface coating!