Laminar oxide in hvof coating
09-13-2012, 04:34 PM,
Laminar oxide in hvof coating
Hi everyone.

I am new to thermal spray process. Recently one of our hvof spray powder, amperit593, is showing obvious multiple layer in its coating. I presume this problem is called laminar oxide? I'll try to load the metalography pic when i get the opportunity.
The machine was just calibrated by oem just 2 months back, and we rechecked the coating recipe. Nothing was changed. We also changed multiple powder batches to try, showing the same results.
Does anyone have any opinion on this?

09-13-2012, 11:09 PM,
RE: Laminar oxide in hvof coating
If you do not change anything, in parameters and spray media, you must check the cooling air for oil, or quality of gases been used, of course you must check gun geometry before.
Best regards
02-24-2014, 09:41 PM,
RE: Laminar oxide in hvof coating
Often ifthe powder feed rate is too high you will get layers

Possibly Related Threads…
Thread Author Replies Views Last Post
  oxide cluster in NiCrAl plasma coating Zhiguo 5 5,277 09-26-2018, 04:48 PM
Last Post: bpls670
  Oxide stringers in Metco 58NS coating thezombiesprayer 2 4,568 08-13-2012, 09:56 AM
Last Post: thezombiesprayer
  chrome oxide coating failure - 24" dia. steel roll rconnor 3 5,504 07-10-2012, 02:37 PM
Last Post: loriolo
  Aluminum oxide+titanium oxide schumi 11 11,322 04-19-2011, 11:15 PM
Last Post: loriolo
  oxide stringers and porosity In HVOF WC-CO wilfred1963 13 10,489 03-22-2011, 07:45 AM
Last Post: Khairul Anwar
  Coating retention - Molybdenum Oxide Butchless1 1 3,583 11-03-2009, 06:52 PM
Last Post: Gordon
  Chrome Oxide Coating: Free Chrome rayudugirish 2 4,969 10-15-2009, 02:30 AM
Last Post: Gordon
  ZrO2+yttrium oxide TBC Coating Colour joanwang 1 5,706 09-11-2009, 05:24 PM
Last Post: Gordon
Shy Chromium Oxide Coating - Surface Finish Ra values Ian Mc 5 10,597 05-15-2009, 05:17 PM
Last Post: Gordon
  5pII chromium oxide coating ehsan 5 6,295 04-12-2009, 11:15 PM
Last Post: Gordon
  Chrome Oxide Coating Failure M Brecker 6 11,921 03-11-2009, 01:36 PM
Last Post: KevinT
  Oxide and porosity in WC-CoCr coating ycwbycwb 4 10,378 05-10-2008, 02:39 PM
Last Post: Gordon

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd