Gordon England Surface Engineering Forum


PRESSURE AND STRESS
UNIT CONVERSION CALCULATOR

(Strength, elastic moduli)

pascalPa
megapascalMPa
barbar
torrtorr
millitorr (microns - vacuum industry)mtorr
kilogram-force per square centimetrekgf cm-2
dyne per square centimetredyn cm-2
pound-force per square inch (PSI)lbf in-2
ton-force per square inch (long UK) (TSI)tnf in-2
ton-force per square inch (short US) (TSI)tnf in-2
millimetre mercurymm Hg
micrometre mercury (microns - vacuum industry)µm Hg
inch mercuryin Hg
millimetre watermm H2O
foot waterft H2O
atmoshere (standard)atm
tonne-force per square metretf m-2
metre waterm H2O

Pressure

Definition:
The force acting on a unit of area. Stress and strength quantities can be included in this definition. Quantities like Young's modulus of elasticity share the same units but are derived from stress divided by strain (strain having dimensionless units).





CONVERSION CALCULATORS

Convert between Different Units of Measurement

Index of Unit Converters
ACCELERATION
ANGLE
AREA
AREA
DENSITY
DENSITY
DISTANCE
DYNAMIC
VISCOSITY
ENERGY
ENERGY
DENSITY
ENTROPY
FEED RATE
FLOW RATE
FORCE
FUEL
CONSUMPTION
HEAT
CAPACITY
HEAT FLUX
DENSITY
HEAT TRANSFER
COEFFICIENT
IRRADIANCE
KINEMATIC
VISCOSITY
LENGTH
MASS
POWER
PRESSURE
SPECIFIC
ENERGY
SPECIFIC
ENTHALPY
SPECIFIC
ENTROPY
SPECIFIC HEAT
CAPACITY
SPECIFIC
VOLUME
SPEED
TEMPERATURE
THERMAL
CONDUCTIVITY
TIME
TORQUE
VELOCITY
VOLUME
VOLUMETRIC
HEAT CAPACITY
Unit Prefixes
Plasma
Gas Flow
Hardness
MPa - GPa
Computing
Bits and Bytes

To use the measurement conversion calculators simply enter a number value into the desired field and click calculate. All results shown will be equivalent values. Values are given to seven significant figures ( the odd result may show 9's or 0's over running). Values of 10 000 or greater will be displayed in the e-format e.g. 2.3456e7 which equals 2.3456 x 107 or 23 456 000. Values lower than 0.001 will be displayed in the e-format e.g. 2.3456e-5 which equals 2.3456 x 10-5 or 0.000 023456. The calculators require that your browser has java script enabled. View all measurement unit conversion calculators on the same page (may not work with all browsers; requires Iframe).

Si Units:
SI Base Units
SI Derived Units
expressed with special names
expressed in terms of SI base units
expressed in terms in terms of SI units with special names
SI Unit Prefixes
Non-SI Units
accepted by SI
currently accepted by SI
derived CGS units with special names
other non-SI units
Constants
Glossary of Units




Google
 



Gordon England Independent Thermal Spray Coating Consultant
Telephone: +44 (0)1252 405186

PLEASE CLICK HERE TO EMAIL

Site Links

Alternative Site Recommended for Users of Microsoft Internet Explorer

Homepage

Introducing

Nature of Thermal Spray Coatings

Surface Engineering Forum

Thermal Spray Gun Repair Service

Plasma Consumable Parts

Thermal Spray Powder Supplies

Applications:

Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers

HVOF Coating of Paper Making Roll

Abradable Coatings

Photomicrographs

Thermal Spray Processes:

Combustion Wire Thermal Spray Process

Combustion Powder Thermal Spray Process

Arc Wire Thermal Spray Process

Plasma Thermal Spray Process

HVOF Thermal Spray Process

Detonation Thermal Spray Process

Plasma Flame Theory

Cold Spray Coating Process



Wear and Use of Thermal Spray Coatings

Corrosion and Use of Thermal Spray Coatings

Glossary of Thermal Spray and Surface Engineering Terms

Image Directory for Thermal Spray Coatings

Plasma Gas Flow Information

Plasma Gas Flow Correction Calculator

Contact Form

Links to other interesting sites related to thermal spray and surface engineering

Reciprocal Links

Periodic Table of the Elements

SI Units

Calculators for Conversion between Units of Measurement

Hardness Testing

Surface Engineering Message Board Archive

Surface Engineering Message Board Archive Index

Search This Site

© Copyright Gordon England