HEAT FLUX DENSITY / IRRADIANCE

UNIT CONVERSION CALCULATOR

watt per square metreW m-2
calorieIT per second square centimetrecalIT s-1 cm-2
calorieth per second square centimetrecalth s-1 cm-2
calorieIT per minute square centimetrecalIT min-1 cm-2
calorieth per minute square centimetrecalth min-1 cm-2
calorieIT per hour square centimetrecalIT h-1 cm-2
calorieth per hour square centimetrecalth h-1 cm-2
kilocalorieIT per hour square metreKcalIT h-1 m-2
kilocalorieth per hour square metre Kcalth h-1 m-2
British thermal unitIT per hour square foot BTUIT h-1 ft-2
British thermal unitth per hour square footBTUth h-1 ft-2
British thermal unitIT per minute square foot BTUIT min-1 ft-2
British thermal unitth per minute square footBTUth min-1 ft-2
British thermal unitIT per second square foot BTUIT s-1 ft-2
British thermal unitth per second square footBTUth s-1 ft-2
British thermal unitIT per second square inch BTUIT s-1 in-2
British thermal unitth per second square inchBTUth s-1 in-2

Heat Flux Density

Definition:
The amount of power or heat flow that is exchanged across a unit area of a system. If the type of calorie or Btu is not specified, it is probably best to assume it is IT (Internation Table).





CONVERSION CALCULATORS

Convert between Different Units of Measurement

Index of Unit Converters
ACCELERATION
ANGLE
AREA
AREA
DENSITY
DENSITY
DISTANCE
DYNAMIC
VISCOSITY
ENERGY
ENERGY
DENSITY
ENTROPY
FEED RATE
FLOW RATE
FORCE
FUEL
CONSUMPTION
HEAT
CAPACITY
HEAT FLUX
DENSITY
HEAT TRANSFER
COEFFICIENT
IRRADIANCE
KINEMATIC
VISCOSITY
LENGTH
MASS
POWER
PRESSURE
SPECIFIC
ENERGY
SPECIFIC
ENTHALPY
SPECIFIC
ENTROPY
SPECIFIC HEAT
CAPACITY
SPECIFIC
VOLUME
SPEED
TEMPERATURE
THERMAL
CONDUCTIVITY
TIME
TORQUE
VELOCITY
VOLUME
VOLUMETRIC
HEAT CAPACITY
Unit Prefixes
Plasma
Gas Flow
Hardness
MPa - GPa
Computing
Bits and Bytes

To use the measurement conversion calculators simply enter a number value into the desired field and click calculate. All results shown will be equivalent values. Values are given to seven significant figures ( the odd result may show 9's or 0's over running). Values of 10 000 or greater will be displayed in the e-format e.g. 2.3456e7 which equals 2.3456 x 107 or 23 456 000. Values lower than 0.001 will be displayed in the e-format e.g. 2.3456e-5 which equals 2.3456 x 10-5 or 0.000 023456. The calculators require that your browser has java script enabled. View all measurement unit conversion calculators on the same page (may not work with all browsers; requires Iframe).

Si Units:
SI Base Units
SI Derived Units
expressed with special names
expressed in terms of SI base units
expressed in terms in terms of SI units with special names
SI Unit Prefixes
Non-SI Units
accepted by SI
currently accepted by SI
derived CGS units with special names
other non-SI units
Constants
Glossary of Units


Gordon England Surface Engineering Forum








Gordon England Independent Thermal Spray Coating Consultant
Telephone: +44 (0)1252 405186

Email: tsc@gordonengland.co.uk

Site Links


Introducing

Nature of Thermal Spray Coatings

Surface Engineering in a Nutshell

Surface Engineering Forum

Thermal Spray Gun Repair Service

Plasma Consumable Parts

Thermal Spray Powder Supplies

Applications:

Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers

HVOF Coating of Paper Making Roll

Abradable Coatings

Photomicrographs

Thermal Spray Processes:

Combustion Wire Thermal Spray Process

Combustion Powder Thermal Spray Process

Arc Wire Thermal Spray Process

Plasma Thermal Spray Process

HVOF Thermal Spray Process

HVAF Thermal Spray Process

Detonation Thermal Spray Process

Plasma Flame Theory

Cold Spray Coating Process



Wear and Use of Thermal Spray Coatings

Corrosion and Use of Thermal Spray Coatings

Glossary of Thermal Spray and Surface Engineering Terms

Image Directory for Thermal Spray Coatings

Plasma Gas Flow Information

Plasma Gas Flow Correction Calculator

Contact Form

Links to other interesting sites related to thermal spray and surface engineering

Reciprocal Links

Periodic Table of the Elements

SI Units

Calculators for Conversion between Units of Measurement

Hardness Testing

Surface Engineering Message Board Archive

Surface Engineering Message Board Archive Index

Photography Gallery2

Photography Gallery3


© Copyright Gordon England