Login

sreenuvundela · 01-03-2014, 08:41 AM,

Hai Friends,

I want to coat Metco 2043 powder with our F4 Torch Plasma Spray gun of AMT make.

Kindly share process parameters for the same if you already done the same.

Regards,

SREENIVAS

loriolo · 01-16-2014, 11:02 PM,

Hi Sreenivas
I use this parameters: Powder injector 2mm, Distance 8 mm, angle 105°, air cooling parallel 2,6 bar, argon 48 NLPM, H2 4,2 NLPM, 460 amp., 62 V, Carrier 2,8 NLPM, Spreader/suction L55°/601, Spray rate 42 g/min, Spray distance 148 mm.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Required Material for Spray	demionkrishan	3	3,249	09-12-2022, 09:29 AM Last Post: Coatingmate_Thomas
	metco 101bns powder / tensile strength	RogerMilam	6	6,143	05-08-2022, 07:53 PM Last Post: landemarre
	Metco 5P II Parameters (Metco 308)	tobjung	1	1,309	03-10-2022, 08:41 PM Last Post: burakbasaran
	Metco powder code selection	GuadalupeSullivan	1	3,929	06-27-2019, 10:24 AM Last Post: loriolo
	Material Required Calculation Help	connoramcguigan	3	2,774	11-21-2018, 09:43 PM Last Post: sprayloud
	Sulzer Metco 58NS Copper-Nickel-Indium alloy powder question	RaymondF2	1	3,197	09-05-2018, 04:35 PM Last Post: ServiceTech
	Calculating Required Powder for Coating Mud rotors	demionkrishan	5	3,945	06-26-2018, 02:36 PM Last Post: sprayloud
	Metco powder code selection	mohsen hasanzadeh	1	3,088	10-10-2016, 09:15 PM Last Post: loriolo
	Amdry 962 and Metco 204 NS parameters F1 45°	giuiori75	2	10,931	03-24-2016, 04:31 PM Last Post: Max K
	Poor flame with Ni-based metallic powder - HVOF process	Roy	2	4,649	02-26-2016, 12:30 AM Last Post: Roy
	Process Parameters for T400	scorpionking	0	3,863	12-17-2013, 04:38 PM Last Post: scorpionking
	Al-Si Graphit Powder metco 313NS	mlavar	4	7,435	09-29-2013, 01:41 PM Last Post: mlavar
	Process Gasses Purity Impact towards Plasma Spray Process, equipment or outcome	Alexangel1226	8	12,396	06-12-2012, 02:46 PM Last Post: Eric Tolliver
	Parameters that affect the hardness of Metco 204BNS TBC	thezombiesprayer	2	6,713	02-10-2012, 02:09 AM Last Post: thezombiesprayer
	least powder amount used in HVOF process	hustzc	1	4,084	06-23-2010, 12:35 PM Last Post: Gordon