Al-Si Graphit Powder metco 313NS
09-05-2013, 07:54 AM,
#1
Al-Si Graphit Powder metco 313NS
Dear Friends
Hi
we could not able to get Al-Si Graphite (Metco 313Ns), as you know sulzer metco introduce that this powder morphology is clad, what is meaning of clad? and is it possible to make this powder as we blend the powder of Al,Si and Graphite,

Thanks
Reply
09-09-2013, 05:22 PM,
#2
RE: Al-Si Graphit Powder metco 313NS
Hi Mlavar

Metco 313-NS is an aluminium alloy - graphite composite powder. The two components AlSi and graphite are bound together using organic binder. It is not possible to make this powder by just blending the components together.
Reply
09-22-2013, 10:57 AM,
#3
RE: Al-Si Graphit Powder metco 313NS
Hi Gordon
thanks for you advice, can i have a binder specification and if we find AlSi and have a binder, is it possible and how?
thanks
Reply
09-24-2013, 10:26 PM,
#4
RE: Al-Si Graphit Powder metco 313NS
Hi mlavar
Typical Metco 313NS Composition is as follow: Aluminum 40.0%, Graphite 45.5%, Silicon 5.5% Organic Binder 9.0%
Typical Size Range: -100 mesh +15 microns (-150 +15 microns) .The organic binders are temporary additives that burn off on flame with minimal residue, if you want and you have the facilities in order to make powders, off course you can, it seem easy, but take in mind that powders for OEM applications need to be approved.
Best regards
Luigi
Reply
09-29-2013, 01:41 PM,
#5
RE: Al-Si Graphit Powder metco 313NS
Hi Loriolo
thanks for your advice, according to need we have to do it is it possible describe the which binder can we use?
thanks
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  metco 101bns powder / tensile strength RogerMilam 6 6,013 05-08-2022, 07:53 PM
Last Post: landemarre
  Metco powder code selection GuadalupeSullivan 1 3,854 06-27-2019, 10:24 AM
Last Post: loriolo
  Sulzer Metco 58NS Copper-Nickel-Indium alloy powder question RaymondF2 1 3,150 09-05-2018, 04:35 PM
Last Post: ServiceTech
Question Metco powder code selection mohsen hasanzadeh 1 3,039 10-10-2016, 09:15 PM
Last Post: loriolo
  F4 Gun Process Parameters required for Metco 2043 Powder sreenuvundela 1 7,552 01-16-2014, 11:02 PM
Last Post: loriolo



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd