hard chrome method
03-12-2007, 09:45 AM,
#1
hard chrome method
Hello,
My name is Şevket from Turkey. I am a production manager in a factory which manufactures engine valves. My problem is about the hard chrome plating for the surfaces of valves. We are plating hard chrome for ten years. And now we improved our technology with a new system. In this system first of all we are sinking the valves to clean the surfaces from oil and the other unwanted materials in the caustic bath with the opposite current. And then sinking to the other two baths including water. After that we send them to the chrome bath which includes chromic acid and sulfuric acid. I see that the stem part of the valve is burned and there is no clear appearing on the surface. If i decrease the current then it doesn't clear valve. When i use normal current for caustic bath the same problems repeat. Expecially the tips are burning, the middle of the stem surfaces are clouded or mat. which amper must i work for cleaning and chrome plating. What are the suitable chemical materials for the plating.
The temperature is nearly 45 for cleaning and the current is 1000 A for 96 valves and their area is 0,2 dm2 for each valve cleaning ın 180 seconds.Redresor voltage is 5,5-6V.
For the chrome tank the temperature is 65 and the current 1200 for 96 valve and the surface area is 0,2 dm2 for each valve. The time is 10 minutes. Redresor voltage is 4V
Is my method suitable for chrome plating or not and what must i do?
Reply
03-12-2007, 01:26 PM,
#2
RE: hard chrome method
Hi ┼×evket

Sign0016 to the Surface Engineering Forum.

My knowledge of the hard chromium electroplating process is limited, so I hope someone else here can give you guidance.

The following links should provide some reading and may help.

(sorry links are dead)
Reply
03-23-2007, 07:53 AM,
#3
RE: hard chrome method
Thank you very much for your interest Mr Gordon. Your advise helped me.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Sand Blasting with SiC or Hard Alloy Met.Eng. 0 644 03-07-2020, 07:13 PM
Last Post: Met.Eng.
  HVAF tungsten carbide to replace hard chrome - Help??!!! Adamreis 2 2,459 02-20-2017, 11:04 PM
Last Post: Vig
  replacing hard chrome coating on piston grisen 3 3,436 10-08-2015, 12:07 PM
Last Post: Guner
  Appling The WC hard coating on Hard substrate behzadsaberi 3 3,119 04-24-2015, 06:04 AM
Last Post: Vadim Verlotski
  plasma hard masking vendors CHI3 2 4,105 03-16-2015, 03:20 AM
Last Post: Meeker77
  Hard coating on valve Edson 3 3,423 02-19-2015, 03:18 AM
Last Post: Axis Machine
  HVOF alternative to Detonation flame method texnicar 7 5,217 12-23-2014, 12:52 PM
Last Post: remistudio
  Hard Chrome failure on Ducati rocker arms!! Ago37 2 4,829 09-06-2014, 09:33 AM
Last Post: Stephen Booth
  What is the Correct Test Method for Case Hardened Steel dunlaw 7 49,745 10-27-2012, 12:55 AM
Last Post: Gordon
  Vicker's Hardness testing complete method for copper(thickness 0.07mm to 0.28mm) Boopesh 1 7,686 02-24-2011, 07:01 PM
Last Post: Gordon
  Chrome Oxide Coating: Free Chrome rayudugirish 2 5,058 10-15-2009, 02:30 AM
Last Post: Gordon
Question Is WC based hard coating is repairable? dibyendudhara 2 4,946 05-17-2008, 10:47 AM
Last Post: hvofhamid
  Chrome Carbide - Nickel Chrome or 95MXC in wire form for a Cylinder Liner? mcg_pinsbushing 0 6,481 05-07-2008, 10:00 AM
Last Post: mcg_pinsbushing



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd