WC10Co4Cr accumulation in JP5000 nozzle
04-06-2019, 01:04 AM, (This post was last modified: 04-06-2019, 01:08 AM by irishcorker61.)
#1
WC10Co4Cr accumulation in JP5000 nozzle
Hello everyone, I am new here and come straight out with a problem. Can anyone help me understand why our WC10Co4Cr is accumulating in the nozzle of the JP5000 but the same powder does not do this in the DJ2700 gun?

None of us can figure out what could be causing this in one gun but not the other. Ashamed0002 Any suggestions would be greatly appreciated.

Thanks in advance.
Reply
04-06-2019, 08:26 AM,
#2
RE: WC10Co4Cr accumulation in JP5000 nozzle
(04-06-2019, 01:04 AM)irishcorker61 Wrote: Hello everyone, I am new here and come straight out with a problem. Can anyone help me understand why our WC10Co4Cr is accumulating in the nozzle of the JP5000 but the same powder does not do this in the DJ2700 gun?

None of us can figure out what could be causing this in one gun but not the other. Ashamed0002 Any suggestions would be greatly appreciated.

Thanks in advance.

JP5000 and DJ2700 are two completely different HVOF burners. Each burner has a specific, optimal parameter set for each powder. You have used JP5000 parameters that are too hot (too much kerosene) and therefore your powder melts inside the nozzle and clogs up.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Bell Dimension of JP5000 parts for computational purpose Lalit 0 2,358 06-16-2015, 09:52 AM
Last Post: Lalit
  Converging Diverging Nozzle Edson 3 3,375 12-19-2014, 08:13 PM
Last Post: loriolo
  DJ 2700 nozzle for hydrogen RV_DMG 1 2,813 10-27-2014, 12:33 AM
Last Post: KevGarty
  JP5000 combustion tube KevGarty 5 5,509 11-01-2013, 09:19 PM
Last Post: kschewe
  accumulation of powder in hvof nozzle mlavar 7 6,556 06-29-2013, 07:35 AM
Last Post: mlavar
  JP5000 Oxygen KevGarty 0 2,390 09-24-2012, 07:42 AM
Last Post: KevGarty
Question how can i find WC10Co4Cr propreties ? vladutzu86 0 2,370 02-03-2012, 04:02 PM
Last Post: vladutzu86
  Inconel 625 - JP5000 SDA 7 8,837 12-28-2011, 06:54 PM
Last Post: djewell
  F4-MB Nozzle clarification ravi_n59 1 3,636 12-09-2011, 04:28 PM
Last Post: landemarre
Information moisture in nozzle and on wire Christine 6 6,082 10-19-2011, 03:33 AM
Last Post: ServiceTech
  The Nozzle material of the spray gun? William 4 5,182 05-05-2011, 01:09 PM
Last Post: Gordon
  JP5000 mehongbo 7 8,640 11-12-2010, 08:19 PM
Last Post: Kopi
  Nozzle Cleaning Andy_81 2 4,281 10-23-2010, 01:36 AM
Last Post: Andy_81
  F4 Nozzle/Electrode Wear Rich 7 9,660 04-16-2010, 05:29 PM
Last Post: Diucky
  SM 3MB Gun with GP Nozzle ykang 7 8,940 06-03-2009, 12:27 PM
Last Post: LEN WOOD



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd