Stripping HVOF Nickel Bound
03-19-2013, 08:13 PM,
#1
Stripping HVOF Nickel Bound
Hey all,

I am currently knee deep (turn of phrase) in learning to strip HVOF sprayed WcCoCr from various parts and substrates using an Electrolytic Rochelle Method. It's going quite well.

Just today I was asked if it would be possible to strip another Carbide spray however Nickel bound instead.

I'm positive the above mentioned method will not work, as it attacks the Cobalt contained in the afore mentioned powder.

So any suggestions as far as a chemical bath I could use?
Reply
03-23-2013, 11:07 AM,
#2
RE: Stripping HVOF Nickel Bound
Chemical bath are dangerous for environment, so try while is possible to do coating striping by sandblasting, high pressure water, grinding...
Best regards
Luigi
Reply
03-25-2013, 01:41 PM,
#3
RE: Stripping HVOF Nickel Bound
You can buy nickel stripping salts to work like the Rochelle salts you are currently using. Search for plating supply companies. They will have what you need.
Reply
04-01-2013, 11:33 AM,
#4
RE: Stripping HVOF Nickel Bound
Thanks for the info. We have looked into the environmental issue with our current process and see no reason to discontinue its use.

While we looked into using high pressure water, the cost for a shop just starting out, is a little excessive.

I will definitely look into the Nickel salts you mentioned to see they're availability and cost.

Thanks again for the response.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Rochelle Salt stripping of WCCo AYoungEngineer 0 1,034 07-18-2019, 12:35 AM
Last Post: AYoungEngineer
  removal or stripping of coatings mountprat 17 29,945 04-22-2019, 02:34 PM
Last Post: velocity
  Stripping off from mud rotors velocity 4 1,618 02-21-2019, 05:13 AM
Last Post: demionkrishan
  Coating stripping KevGarty 1 2,234 09-16-2015, 10:26 AM
Last Post: Vadim Verlotski
  Nickel based powder Steamhammer 0 1,810 04-02-2015, 05:24 PM
Last Post: Steamhammer
  Chemical Stripping with Rochelle Salts FWisniewski 0 2,804 02-26-2014, 11:26 PM
Last Post: FWisniewski
  Stripping HVOF Nickel Bound SSC 6 5,424 02-26-2014, 11:24 PM
Last Post: FWisniewski
  Chemical Stripping karlos4 2 5,144 07-23-2012, 02:48 AM
Last Post: kschewe
Shy Stripping for Metco 81vf-ns Varela 5 7,238 11-19-2011, 10:43 PM
Last Post: LEN WOOD
Question Nickel Aluminide on Platinum k09 7 5,968 03-15-2010, 06:11 PM
Last Post: Gordon
  Stripping solutions for WC-Co ycwbycwb 2 4,233 01-25-2010, 01:17 PM
Last Post: joanwang
Question loss on nickel during hvof process twortham 1 3,192 09-16-2009, 03:19 PM
Last Post: Gordon
  Stripping of Diffusion Al-Si Coating on Superalloy khajeh 2 4,308 12-15-2008, 03:02 PM
Last Post: Steph



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd