Stress in the substrate
05-30-2007, 05:51 PM,
#1
Stress in the substrate
Hallo,
Does sresidual stress in the substrate can cause interlayer disbonding in Arc sprayed coating?
Vijay Deshpande
Reply
06-10-2007, 07:11 AM,
#2
RE: Stress in the substrate
Hi Vijay

High residual stress in a substrate should only effect the coating if those stresses are relieved during or after coating (substrate volume change or distortion). Can't say I've come across this as a problem regarding coatings. If your substrate part is unstable because of high residual stress and is liable to distortion due to temperature change or grit blasting/machining, then I would recommend a stress relieving heat treatment at some stage prior to coating.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Substrate preparation VS bonding strength plzc126330 2 1,937 01-09-2018, 03:48 AM
Last Post: plzc126330
  Coating for Epoxy substrate webrits 2 2,982 03-20-2015, 03:09 PM
Last Post: Laurent
Star Residual stress ebcurt 2 2,789 02-08-2014, 09:49 AM
Last Post: loriolo
  Surface contact stress limit over an HVOF coating HVoilF 1 3,900 05-22-2013, 02:07 PM
Last Post: djewell
  Spraying on Magnesium substrate Madila Awalini 9 7,304 07-05-2010, 04:01 AM
Last Post: Madila Awalini
  spray and fuse substrate problems pakalano 2 6,076 03-26-2009, 11:44 PM
Last Post: pakalano
  Machining Acetal Copolymer and Stress RamaAnanda 2 4,788 02-26-2009, 03:32 AM
Last Post: RamaAnanda
  new technique residual stress measurement ndt ennio curto 3 7,056 12-07-2008, 07:50 PM
Last Post: ennio curto
  Removing TCC coating from INC625 substrate mightyatom 1 5,854 10-01-2008, 09:41 PM
Last Post: Gordon
  Sand Blasting on Titanium Substrate ykang 8 18,436 05-28-2008, 09:36 AM
Last Post: ykang
  stress checks on hardfaced screw element rbateriwala 5 8,438 12-15-2007, 07:49 AM
Last Post: drramc



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd