substrate deformation of WC coating in gate valve
06-28-2009, 12:19 PM,
#1
substrate deformation of WC coating in gate valve
Hi
Our customer that produce gate valve say that after several working opening/closing of gate valves we have some deformation of substrate of WC coating on the gate.this deformation is effect of seat on the coating substrate of gates(to be crushed). base material of gates in this kind is 4130 AISI with 25 HRC .is this possible that we have some heat treatment on gates before coating for solve this problem?(such as nitriding or ...)
Reply
07-07-2009, 12:49 PM,
#2
RE: substrate deformation of WC coating in gate valve
Hi Ehsan

Not sure if surface treatment will be the answer here, I think you will need to consider changing to a stronger base material.
Reply
12-14-2010, 09:15 AM,
#3
RE: substrate deformation of WC coating in gate valve
Hi,

The conversation is rather old ! Hope the problem is solved , The reason I joined this site is to say that I have experience of exactly the same problem and we solved it before so I,m ready to co-operate in this case !

Overall direction of the history of covnersations is in correct directions but some fundumental steps are incorrect so it needs some changes from the base up to end stage of filling the face with epoxy.

Our main activity was repairing of shear gate valves of Cameron brand which is used in oil drilling facilities. 5000 PSI is rather low pressure for such application while 15000 psi is some how normal pressure.

Regards
Asiaf
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Appling The WC hard coating on Hard substrate behzadsaberi 3 3,026 04-24-2015, 06:04 AM
Last Post: Vadim Verlotski
  Coating for Epoxy substrate webrits 2 2,794 03-20-2015, 03:09 PM
Last Post: Laurent
  Thermal Barrier Coating Aluminum Substrate for corrosion resistance alaskangrown 4 4,793 03-02-2015, 06:43 PM
Last Post: alaskangrown
  Valve seat coating shantanu 2 2,968 02-19-2015, 03:23 AM
Last Post: Axis Machine
  Hard coating on valve Edson 3 3,325 02-19-2015, 03:18 AM
Last Post: Axis Machine
  ball valve and gate valve coating Jaydev 2 4,347 01-29-2015, 05:06 PM
Last Post: IgorGarcia
  WC-Co by HVOF on Monel Ball valve raviswanadha 4 4,503 10-15-2012, 12:03 PM
Last Post: raviswanadha
  sealing gate valve WC coated problem ehsan 15 12,906 02-02-2011, 04:09 PM
Last Post: ehsan
  Spraying on Magnesium substrate Madila Awalini 9 7,026 07-05-2010, 04:01 AM
Last Post: Madila Awalini
  valve opening procedure sutech 7 7,979 11-12-2008, 05:46 AM
Last Post: Intel55
  Removing TCC coating from INC625 substrate mightyatom 1 5,709 10-01-2008, 09:41 PM
Last Post: Gordon
  Stress in the substrate Vijay Deshpande 1 4,158 06-10-2007, 07:11 AM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd