Stress in the substrate
05-30-2007, 05:51 PM,
Stress in the substrate
Does sresidual stress in the substrate can cause interlayer disbonding in Arc sprayed coating?
Vijay Deshpande
06-10-2007, 07:11 AM,
RE: Stress in the substrate
Hi Vijay

High residual stress in a substrate should only effect the coating if those stresses are relieved during or after coating (substrate volume change or distortion). Can't say I've come across this as a problem regarding coatings. If your substrate part is unstable because of high residual stress and is liable to distortion due to temperature change or grit blasting/machining, then I would recommend a stress relieving heat treatment at some stage prior to coating.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Coating for Epoxy substrate webrits 2 2,870 03-20-2015, 03:09 PM
Last Post: Laurent
Star Residual stress ebcurt 2 2,682 02-08-2014, 09:49 AM
Last Post: loriolo
  Surface contact stress limit over an HVOF coating HVoilF 1 3,798 05-22-2013, 02:07 PM
Last Post: djewell
  Spraying on Magnesium substrate Madila Awalini 9 7,147 07-05-2010, 04:01 AM
Last Post: Madila Awalini
  Machining Acetal Copolymer and Stress RamaAnanda 2 4,663 02-26-2009, 03:32 AM
Last Post: RamaAnanda
  new technique residual stress measurement ndt ennio curto 3 6,967 12-07-2008, 07:50 PM
Last Post: ennio curto
  stress checks on hardfaced screw element rbateriwala 5 8,310 12-15-2007, 07:49 AM
Last Post: drramc

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd