Surface Engineering Forum › Surface Engineering › Surface Engineering Threads v
Stellite (Cobalt Based) that resist against Coal @ 1200deg C



Thread Modes
Stellite (Cobalt Based) that resist against Coal @ 1200deg C
12-11-2014, 08:29 AM,
#1
Iwan Sedaryawan CA Offline
Member
***
 Posts: 8
Threads: 7
Joined: May 2014
Reputation: 0
Stellite (Cobalt Based) that resist against Coal @ 1200deg C
Dear all,
we will coat Thermocouple that sinking in Coal @ 1200 deg C, please let me know what grade of Stellite (Cobalt Based ) can resist against this application..
Thanks in advance
Thanks and regards,
Iwan Sedaryawan | Director Cipta Agung CV | HP : +62 (0) 818504137 - 81357725946-08117019540 - | PIN BB : 2AD850B7| Skype : iwan.sedaryawan |Email : sedaryawan@ciptaagung.com | sedaryawan@yahoo.com | sedaryawan@gmail.com | Web-site : https://www.ciptaagung.com
Email Find
Reply
12-11-2014, 05:04 PM,
#2
Vadim Verlotski Offline
SuperMember
******
 Posts: 221
Threads: 0
Joined: Sep 2014
Reputation: 13
RE: Stellite (Cobalt Based) that resist against Coal @ 1200deg C
(12-11-2014, 08:29 AM)Iwan Sedaryawan CA Wrote: Dear all,
we will coat Thermocouple that sinking in Coal @ 1200 deg C, please let me know what grade of Stellite (Cobalt Based ) can resist against this application..
Thanks in advance

All of cobalt or nickel alloy not hold 1200 ° C for a long time. However, if you only need a short-time work at this temperature, it is best not to use cobalt-stellite, but nickel-alloy for example, Inconel 625 or Ni80Cr20.
Email Find
Reply
12-12-2014, 01:11 PM,
#3
Iwan Sedaryawan CA Offline
Member
***
 Posts: 8
Threads: 7
Joined: May 2014
Reputation: 0
RE: Stellite (Cobalt Based) that resist against Coal @ 1200deg C
(12-11-2014, 05:04 PM)Vadim Verlotski Wrote:
(12-11-2014, 08:29 AM)Iwan Sedaryawan CA Wrote: Dear all,
we will coat Thermocouple that sinking in Coal @ 1200 deg C, please let me know what grade of Stellite (Cobalt Based ) can resist against this application..
Thanks in advance

All of cobalt or nickel alloy not hold 1200 ° C for a long time. However, if you only need a short-time work at this temperature, it is best not to use cobalt-stellite, but nickel-alloy for example, Inconel 625 or Ni80Cr20.
okay thanks for your above comment...
Thanks and regards,
Iwan Sedaryawan | Director Cipta Agung CV | HP : +62 (0) 818504137 - 81357725946-08117019540 - | PIN BB : 2AD850B7| Skype : iwan.sedaryawan |Email : sedaryawan@ciptaagung.com | sedaryawan@yahoo.com | sedaryawan@gmail.com | Web-site : https://www.ciptaagung.com
Email Find
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Stellite 31 Daneizer 0 816 02-05-2021, 04:15 PM
Last Post: Daneizer
  Coating on Boiler tube in Coal Fired Power Plan by using Tafa wire 97MXC Iwan Sedaryawan CA 4 4,805 04-21-2017, 03:17 PM
Last Post: J!m
  Stellite 6 welding rods Desmond 7 14,962 04-18-2016, 07:31 AM
Last Post: sreenuvundela
  Diamond containing wear-resist HVOF coatings Boris Eizner 0 2,610 12-23-2014, 08:47 AM
Last Post: Boris Eizner
  Can stellite 6 fuse ??? Met.Eng. 1 4,266 03-12-2014, 06:19 AM
Last Post: sreenuvundela
  Cobalt Fine Powder Coating ykang 10 11,363 07-16-2013, 09:49 AM
Last Post: wgg237
  Stellite Powder test guru2707 1 7,184 02-27-2013, 08:05 AM
Last Post: novakmichal86
  Stellite Hardfacing test guru2707 4 13,054 06-04-2012, 01:03 PM
Last Post: Aseem
  Coating of coal Boiler tube wall iwan-sedaryawan 6 8,215 05-10-2011, 07:16 AM
Last Post: A.Termika Ltd
  Laser Cladding Stellite#6 Kedarnath 6 17,982 02-04-2011, 01:51 PM
Last Post: Nick4u1
  stellite coating samsarani 1 10,203 07-29-2010, 09:19 PM
Last Post: djewell



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd