Stellite 6 welding rods
01-06-2012, 08:07 AM,
#1
Stellite 6 welding rods
Where can I import Stellite 6 welding rods?

Thank you
Reply
01-06-2012, 11:34 AM,
#2
RE: Stellite 6 welding rods
Hai

Stellite - 6 rod is cobalt base rod. if you are specific about Stellite name (becaue Stellite is trade name of deloro stellite), then you have to procure from deloro stellite only. you can easily find nearest source from internet it slef.

If name is not so important, then you can buy from Weartech Intl LTd, U.S.A and lot of other welding consumable manufacturers also offering Co Base Welding Rods in both Electrode and bare rods.



Regards,

SREENIVAS
Reply
01-11-2012, 12:24 PM,
#3
RE: Stellite 6 welding rods
Hi Desmond.

I'm not sure where you are based. Weartech International also produces Co-base welding rods in Europe. Our contact details can be found at www.weartecheurope.co.uk.

Regards,

David
Weartech International Ltd
Reply
08-23-2012, 11:51 AM,
#4
RE: Stellite 6 welding rods
If name is not so important, then you can buy from Weartech Intl LTd, U.S.A and lot of other welding consumable manufacturers also offering Co Base Welding Rods in both Electrode and bare rods. <---- very well said. But is it also important to know the names?
Reply
08-24-2012, 01:47 AM,
#5
RE: Stellite 6 welding rods
Hi Desmond,
This company distributes the products:
Dualrank (M) Sdn. Bhd.
Tel : +603 7845 3701
Fax : +603 7845 8973
Email : sales@dualranksb.com

S.Guna
Reply
08-30-2012, 04:13 PM,
#6
RE: Stellite 6 welding rods
Hi Desmond,
We are manufactures of Wear Resistance and Welding Alloys.
Send me a email with the volume you are looking for and I'll send you the price.

Best regards,
Igor A. Garcia
Surface Engineering Alloy Co.
55 (011) 4063-0563
cod. acesso: 608.176
(727) 528-7998
(407) 883-6701
igorg@surfaceengineering.com

Reply
08-31-2012, 08:02 PM,
#7
RE: Stellite 6 welding rods
Desmond -

Stellite #6 and variations can be found all over the place. Are you looking for coated electrodes? Cored wire? Solid wire? The form matters because it will affect how much you pay and how you can process the material. I recently switched from my MIG operation using #6 cored wire for valve seat harfacing to solid wire #6 on spools. Just set-up an automated TIG op. My purchaser went through a company called Polymet Corporation in Cincinnati - they extruded their own solid wire #6 that can be spooled. Let me know more info and I can try and point you in the right direction Big Grin.
Reply
04-18-2016, 07:31 AM,
#8
RE: Stellite 6 welding rods
Hi David,

Is it same company which is operating from USA and owner is Indian orgin USA settled gentle man and sold the company to some other big company who is in welding consumables business.

Kindly share your website address and product catalogue, we are interested to procure TIG, MIG base Stellite wires and even centrifugal stellite bushes too...

Thanks in advance

Sreenivas
SSCT, INDIA
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  coating seperation after welding raviswanadha 1 1,431 12-17-2016, 11:08 PM
Last Post: loriolo
  STUBS WELDING ALLOYS SW7 wtaz 2 2,925 10-06-2016, 10:32 PM
Last Post: wtaz
  Can stellite 6 fuse ??? Met.Eng. 1 3,748 03-12-2014, 06:19 AM
Last Post: sreenuvundela
  PTA WELDING INSIDE ELBOWS Zanitech 2 3,724 09-27-2013, 09:09 AM
Last Post: Zanitech
  Stellite Powder test guru2707 1 6,786 02-27-2013, 08:05 AM
Last Post: novakmichal86
  Stellite Hardfacing test guru2707 4 12,297 06-04-2012, 01:03 PM
Last Post: Aseem
  High Pressure Piston Rods HVOF coatings HVoilF 14 20,568 12-24-2011, 10:20 AM
Last Post: k09
  Laser Cladding Stellite#6 Kedarnath 6 17,015 02-04-2011, 01:51 PM
Last Post: Nick4u1
  stellite coating samsarani 1 9,470 07-29-2010, 09:19 PM
Last Post: djewell
  Avoiding Diffusion Welding in SS under Vac' Nick Clark 7 9,789 03-03-2007, 05:43 PM
Last Post: hapewoe



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd