How to removal 45VFNS coating?
07-04-2018, 03:01 PM,
#1
How to removal 45VFNS coating?
Hello everyone
how to removal 45VFNS coating after spraying, because some parts didn't fulfill the requirement of customer and should be re-coated again. We've tried blasting only to found out deflection of parts. The part substrate is Ni-based alloy with thickness of 0.5-0.8 mm and coating area is less than 9X15 mm. Is there any chemical method to removal this coating?
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Coating removal by waterjet stripping ArjunAnnam 2 898 07-18-2024, 04:50 AM
Last Post: ArjunAnnam
  Coatings Removal by High Pressure Water Taz 1 1,185 01-16-2023, 07:03 AM
Last Post: Zhao Yun
  removal or stripping of coatings mountprat 18 38,360 10-26-2022, 04:52 PM
Last Post: bshur24
  Tungsten Carbide HVOF Removal PrecisionCarbide 9 15,262 02-24-2020, 11:17 AM
Last Post: Packiaraj Mutharasu
  45VFNS Delamination Meeker77 2 4,439 05-24-2015, 05:46 PM
Last Post: Meeker77
  Methods for removal of W-, Ni- and V-coating kahrax 15 23,896 01-28-2015, 07:53 PM
Last Post: PrecisionCarbide
  45VFNS Laurent 4 6,535 06-03-2013, 08:57 AM
Last Post: Laurent
  Removal of Galvenised coating Vijay Deshpande 1 4,579 01-26-2009, 05:02 PM
Last Post: Gordon
  HVOF T800 removal finnie 2 11,230 12-16-2008, 01:08 PM
Last Post: kurtecard
  REMOVAL PF TSA COATING Vijay Deshpande 2 9,616 01-03-2008, 04:49 PM
Last Post: Vijay Deshpande
Question 88WC - 8Co - 4Cr Removal Advice Batsy 2 7,911 02-05-2007, 09:21 AM
Last Post: Batsy



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd