Removal of Galvenised coating
01-26-2009, 06:37 AM,
Removal of Galvenised coating
Dear All,
Is there any method by which Zinc layer from the galvenised surface can be removed other than grit blasting, The method should be such that it should only remove zinc layer without affecting the base metal.
Thanks and Regards
Vijay Deshpande
01-26-2009, 05:02 PM,
RE: Removal of Galvenised coating
Hi Vijay

You could try stripping using hydrochloric acid solution. You will need to take care as this acid will also attack the steel substrate, particularly when all the zinc has gone.

I remember using concentrated hydrochloric acid with ~20g/l antimony trioxide to remove galvanising from parts for analytical purposes where substrate protection was very important.

Possibly Related Threads…
Thread Author Replies Views Last Post
  Tungsten Carbide HVOF Removal PrecisionCarbide 9 10,959 02-24-2020, 11:17 AM
Last Post: Packiaraj Mutharasu
  removal or stripping of coatings mountprat 17 32,706 04-22-2019, 02:34 PM
Last Post: velocity
  How to removal 45VFNS coating? stvon 0 1,276 07-04-2018, 03:01 PM
Last Post: stvon
  Methods for removal of W-, Ni- and V-coating kahrax 15 18,894 01-28-2015, 07:53 PM
Last Post: PrecisionCarbide
  HVOF T800 removal finnie 2 9,764 12-16-2008, 01:08 PM
Last Post: kurtecard
  REMOVAL PF TSA COATING Vijay Deshpande 2 8,042 01-03-2008, 04:49 PM
Last Post: Vijay Deshpande
Question 88WC - 8Co - 4Cr Removal Advice Batsy 2 6,647 02-05-2007, 09:21 AM
Last Post: Batsy

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd