Coatings Removal by High Pressure Water
01-16-2023, 03:03 AM,
#1
Coatings Removal by High Pressure Water
Dear all,

Alternate method for thermal spray coating removal is by high pressure water (waterjet). The requirement is not to remove base material more than 0.001 inch.

My question is how exactly to measure this material loss? 
If by Metallographic, it could only measure the sample thickness after stripping process. But how to compare with before stripping process and calculate the material loss?
Reply
01-16-2023, 07:03 AM,
#2
RE: Coatings Removal by High Pressure Water
(01-16-2023, 03:03 AM)Taz Wrote: Dear all,

Alternate method for thermal spray coating removal is by high pressure water (waterjet). The requirement is not to remove base material more than 0.001 inch.

My question is how exactly to measure this material loss? 
If by Metallographic, it could only measure the sample thickness after stripping process. But how to compare with before stripping process and calculate the material loss?

Hello Taz,

You can make a shelter to protect partial of the sample, and compare with the stripped part to get the material loss.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Coating removal by waterjet stripping ArjunAnnam 2 898 07-18-2024, 04:50 AM
Last Post: ArjunAnnam
  Hopper Pressure Lower than Gun Pressure devinrist 5 7,790 07-11-2024, 05:45 AM
Last Post: Stephen Booth
  Pressure Regulators? Edson 4 4,775 11-04-2022, 02:07 PM
Last Post: SakshiVerma
  removal or stripping of coatings mountprat 18 38,360 10-26-2022, 04:52 PM
Last Post: bshur24
  Tungsten Carbide HVOF Removal PrecisionCarbide 9 15,262 02-24-2020, 11:17 AM
Last Post: Packiaraj Mutharasu
  How to removal 45VFNS coating? stvon 0 2,181 07-04-2018, 03:01 PM
Last Post: stvon
  Methods for removal of W-, Ni- and V-coating kahrax 15 23,896 01-28-2015, 07:53 PM
Last Post: PrecisionCarbide
  High Pressure Cylinder Compressor Walls Repair HVoilF 2 6,661 05-29-2012, 09:54 PM
Last Post: HVoilF
  High Pressure Piston Rods HVOF coatings HVoilF 14 25,337 12-24-2011, 10:20 AM
Last Post: k09
  85/15 Zn/Al pressure vessel coating spencew 5 8,990 04-01-2011, 06:28 PM
Last Post: MichiganMan
  coatings for sulphuratted hydrogen and salt water enviroment karlos 4 7,137 02-14-2009, 07:56 AM
Last Post: drramc
  Removal of Galvenised coating Vijay Deshpande 1 4,579 01-26-2009, 05:02 PM
Last Post: Gordon
  HVOF T800 removal finnie 2 11,230 12-16-2008, 01:08 PM
Last Post: kurtecard
  REMOVAL PF TSA COATING Vijay Deshpande 2 9,616 01-03-2008, 04:49 PM
Last Post: Vijay Deshpande
Question 88WC - 8Co - 4Cr Removal Advice Batsy 2 7,911 02-05-2007, 09:21 AM
Last Post: Batsy



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd