Almen intensity on HVOF Diamalloy2004
12-06-2016, 11:31 AM,
Almen intensity on HVOF Diamalloy2004
Dear guys,

What would you interpret an almen intensity requirement such as 20N. Will it mean a 0.02 in deflection or 0.2mm deflection in almen N?

The reason I am asking is a requirement on a HVOF tungsten carbide coating, diamalloy2004 is asking for an intensity 0f 20N, with coating thickness of 0.23-0.30 mm.

I am having difficulty to achieve this requirement, as most of the intensity that I get is typically 0.25 range...Even AMS2448 seems to be within this range of intensity. Anyone can share if they can actually achieve 0.2in (0.508mm) instead?

12-17-2016, 11:27 PM,
RE: Almen intensity on HVOF Diamalloy2004
Hi Lazha
Diamalloy 2004 sprayed with DJ has to much stresses, what parameters and system do you used, I used EGun HVOF from FST, with K-623.23 (-45+15) Wc12Co, becouse 2004 has to much fines (-45+5), and all Almen test result was within the specification requested by OEM,
Best regards

Possibly Related Threads…
Thread Author Replies Views Last Post
  Problem with HVOF Diamalloy2004 WillieBoykin 1 806 06-30-2020, 09:05 PM
Last Post: Lemster68
  Almen Intensity Factors Taz 0 1,133 07-17-2017, 04:51 AM
Last Post: Taz
  help to me to measure crystallinity of Hydroxyapatite coatings by relative intensity fahad03092 2 3,234 05-16-2012, 01:17 AM
Last Post: Gordon
  Intensity issue when Analyzing using a Spectrometer ExtremeCoatings 0 2,077 09-29-2011, 08:34 PM
Last Post: ExtremeCoatings
Question How to read a Media Size vs. Intensity chart gejohn 2 8,092 02-15-2007, 06:12 PM
Last Post: Gordon

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd