help to me to measure crystallinity of Hydroxyapatite coatings by relative intensity
05-09-2012, 02:55 PM, (This post was last modified: 05-14-2012, 03:15 AM by fahad03092.)
#1
help to me to measure crystallinity of Hydroxyapatite coatings by relative intensity
To measure crystallinity using relative intensity technique should I need to subtract the peak from constant baseline or baseline that connect the base of all peaks???????

To measure crystallinity of heat treated sample, which sample will be my referenced sample? Pure standard powder or heat treated the powder at the same temperature on which sample was heated is my referenced powder???

Please help me.Thanks a lot.
Reply
05-14-2012, 03:15 AM,
#2
RE: help to me to measure crystallinity of Hydroxyapatite coatings by relative intensity
To measure crystallinity of heat treated sample, which sample will be my referenced sample? Pure standard powder or heat treated the powder at the same temperature on which sample was heated is my referenced powder???


Reply
05-16-2012, 01:17 AM,
#3
RE: help to me to measure crystallinity of Hydroxyapatite coatings by relative intensity
Hi fahad

No experience with this I'm afraid. I would have thought a reference sample would ideally be a heat treated coating with known properties.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Almen Intensity Factors Taz 0 1,065 07-17-2017, 04:51 AM
Last Post: Taz
  Almen intensity on HVOF Diamalloy2004 Lazha 1 1,690 12-17-2016, 11:27 PM
Last Post: loriolo
Lightning How to spray nano-hydroxyapatite (HAp) powder Lalit 6 4,479 12-30-2014, 06:38 PM
Last Post: Met.Eng.
  Intensity issue when Analyzing using a Spectrometer ExtremeCoatings 0 2,007 09-29-2011, 08:34 PM
Last Post: ExtremeCoatings
Question How to read a Media Size vs. Intensity chart gejohn 2 7,977 02-15-2007, 06:12 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd