Amdry 962 and Metco 204 NS parameters F1 45°
02-22-2016, 09:23 PM,
#1
Amdry 962 and Metco 204 NS parameters F1 45°
Hi everyone,
does anyone have experience with Amdry 962 and 204 NS with F1 45° guns?
I would appreciate if you could suggest parameters for these powder.
Thanks in advance for your Kind support.

Regards
Reply
03-19-2016, 07:12 AM,
#2
RE: Amdry 962 and Metco 204 NS parameters F1 45°
(02-22-2016, 09:23 PM)giuiori75 Wrote: Hi everyone,
does anyone have experience with Amdry 962 and 204 NS with F1 45° guns?
I would appreciate if you could suggest parameters for these powder.
Thanks in advance for your Kind support.

Regards

contact me on joris.kraak@hotmail.com, I have the parameters and experience with this type of gun. I optimized complete processes at various companies in the Middle East so they will work.
Reply
03-24-2016, 04:31 PM,
#3
RE: Amdry 962 and Metco 204 NS parameters F1 45°
Hi Joris,

Is F1 gun you are talking about from AMT? I am looking at Pros and Cons for switching to F1 from SG-2086 Praxair ID gun. Is it more robust than SG-2086? Is it worth switching? My application is TBC for combustion hardware for land gas turbines.

Thank you.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Amdry 956 Hardness Benjamin101 3 1,487 04-11-2023, 04:42 PM
Last Post: paikhuan
  3MBTD Amdry 995C parameters Max K 0 837 10-04-2022, 08:38 PM
Last Post: Max K
Question Metco 5P II Parameters (Metco 308) tobjung 1 1,263 03-10-2022, 08:41 PM
Last Post: burakbasaran
  Amdry 9951. Anyone know the maximum coating thickness Antcarroll 2 2,239 01-29-2021, 08:17 AM
Last Post: loriolo
  Starting parameters for Amdry 718 Cl.B edrazee 2 2,805 03-31-2020, 07:09 PM
Last Post: loriolo
  Amdry 9954 for titanium based alloy Bharti Malvi 6 6,077 12-21-2016, 07:39 PM
Last Post: Bharti Malvi
Shy TBS for Metco 450NS and AMDRY 2010 alvliew 3 5,295 06-14-2015, 10:59 PM
Last Post: Johnny_Blaze
  AMDRY 1718- Hardness alvliew 4 8,313 03-13-2015, 11:21 PM
Last Post: loriolo
  F4 Gun Process Parameters required for Metco 2043 Powder sreenuvundela 1 7,550 01-16-2014, 11:02 PM
Last Post: loriolo
  Parameters that affect the hardness of Metco 204BNS TBC thezombiesprayer 2 6,644 02-10-2012, 02:09 AM
Last Post: thezombiesprayer
  Melting, unmelted AlSi Microstructure Amdry 2010 powder William 4 7,162 08-26-2010, 04:00 PM
Last Post: Gordon
  AMDRY 500F AYKAC 1 5,094 03-01-2010, 12:26 PM
Last Post: Gordon
  Amdry 2010 & Metco 601 ykang 2 7,760 06-17-2008, 06:38 AM
Last Post: ykang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd