Parameters that affect the hardness of Metco 204BNS TBC
02-09-2012, 07:55 AM,
#1
Parameters that affect the hardness of Metco 204BNS TBC
Hi

Can I find out what are the parameters that will affect the macro hardness of Metco 204BNS TBC coating?
I have sprayed a coupon with microstructure to be within limits but hardness is slightly high at average of 83HR15N

Thanks

thezombiesprayer
Reply
02-09-2012, 05:36 PM,
#2
RE: Parameters that affect the hardness of Metco 204BNS TBC
Hi thezombiesprayer

A high macro-hardness is probably an indication of higher coating density. Cutting back a little on secondary plasma gas or increasing spray distance may have the desired effect.

Make sure you have sufficient coating thickness/surface finish to ensure a true reading from your superficial Rockwell hardness test before making any parameter changes though Wink
Reply
02-10-2012, 02:09 AM,
#3
RE: Parameters that affect the hardness of Metco 204BNS TBC
(02-09-2012, 05:36 PM)Gordon Wrote: Hi thezombiesprayer

A high macro-hardness is probably an indication of higher coating density. Cutting back a little on secondary plasma gas or increasing spray distance may have the desired effect.

Make sure you have sufficient coating thickness/surface finish to ensure a true reading from your superficial Rockwell hardness test before making any parameter changes though Wink

Hi Gordon
Thanks for the advice! I shall give this a try with my new coupons.
I didn't have much experience with ceramic coatings, so looks like the parameters that can affect the hardness of a coating is similar to those metallic or polyester coatings. I used to tweak on the secondary gas when I deal with metallic coatings.

Thanks

thezombiesprayer
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hardness test of the metco 314ns coating sam xu 7 12,102 04-10-2023, 01:59 AM
Last Post: Zhao Yun
Question Metco 5P II Parameters (Metco 308) tobjung 1 1,263 03-10-2022, 08:41 PM
Last Post: burakbasaran
  Environmental affect on plasma sprayed coatings nshepher 0 2,293 06-26-2018, 09:43 PM
Last Post: nshepher
  Amdry 962 and Metco 204 NS parameters F1 45° giuiori75 2 10,749 03-24-2016, 04:31 PM
Last Post: Max K
  F4 Gun Process Parameters required for Metco 2043 Powder sreenuvundela 1 7,548 01-16-2014, 11:02 PM
Last Post: loriolo
  pencil hardness and tukon hardness test transit 6 19,633 10-04-2012, 02:15 PM
Last Post: bruisjem
  Metco Aluminum SF Hardness M.Naguib 1 6,908 01-19-2011, 05:00 PM
Last Post: Gordon
  About Hardness issue of PAC 6CO by Metco 9MB Gun Amanda 12 15,793 02-03-2009, 12:39 PM
Last Post: adam wintle



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd