Jet Kote O2 and H2 supply pressure requirements?
06-24-2009, 06:06 PM,
#1
Jet Kote O2 and H2 supply pressure requirements?
What gas supply flows and pressure requirements are you using for the Jet Kote.

Someone was telling me O2 was 0-25 bar!!! and 3200scfh!!! and a 3/4" pipe.

They also had the H2 supply of 0-18 bar and 3200scfh (1500nlpm).

That sounds high to me. Most I have ever seen them run is 2100scfh.


anyway... can someone with JK experience enlighten me Smile

Thanks
Reply
06-26-2009, 03:32 PM,
#2
RE: Jet Kote O2 and H2 supply pressure requirements?
ok hmmm so I need 10 bar supply of H2 and 17 bar supply of the O2. Smile
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hopper Pressure Lower than Gun Pressure devinrist 4 4,860 01-03-2016, 05:45 AM
Last Post: Johnny_Blaze
  Pressure Regulators? Edson 3 2,883 01-03-2016, 05:32 AM
Last Post: Johnny_Blaze
  Jet kote gun leakage problem Hector Monjardin 0 2,032 11-18-2015, 04:24 PM
Last Post: Hector Monjardin
  JP 5000 Type System Chiller Power Supply Edson 4 4,519 11-13-2014, 07:45 AM
Last Post: Parat Tech
  Stellite Jet Kote - Green flame? farmcop1 4 5,210 05-29-2012, 07:25 PM
Last Post: farmcop1
  safety requirements Arturas 3 3,678 05-14-2012, 02:49 PM
Last Post: alonzomerrill
  Arc spraying: air quality requirements Stefan 2 3,615 11-24-2011, 10:19 AM
Last Post: Stefan
  85/15 Zn/Al pressure vessel coating spencew 5 7,127 04-01-2011, 06:28 PM
Last Post: MichiganMan
  Peel of coating during pressure testing raviswanadha 6 7,611 01-14-2011, 08:49 PM
Last Post: Gordon
  Jet kote III orthogonal spray parameters query wangqun72 6 7,426 09-05-2010, 05:57 AM
Last Post: k09
  The ratio of oxygen to fuel of Jet kote III wangqun72 5 7,953 09-02-2010, 06:18 PM
Last Post: wangqun72
  Jet Kote nozzle life plyer 8 10,945 05-15-2009, 02:30 PM
Last Post: plyer
  Jet Kote water inlet temp... Intel55 4 6,252 03-19-2009, 10:53 PM
Last Post: Gordon
  Calculating powder requirements Intel55 5 6,354 12-01-2008, 02:56 PM
Last Post: Intel55
  What's maximum pressure loading for WC10Co4Cr? deepskysea 2 5,026 09-04-2008, 10:32 AM
Last Post: deepskysea



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd