Threaded Mode | Linear Mode

Edson · 11-07-2014, 07:56 AM,

Hellow,

Planning to set up a HVOF coating shop with JP 5000 type system but our power supply is 60 kW, somebuddy suggested that I can not get chiller to operate on this power supply capacity!!!! Sad

Any comment/suggestion please...........

Thanks in advance

Daniel

djewell · 11-07-2014, 10:36 PM,

Praxair recommends a 90 kW chiller to keep it cool.

stvon · 11-09-2014, 01:41 PM,

Your power supply is enough for your chiller

Edson · 11-10-2014, 07:14 AM,

(11-09-2014, 01:41 PM)stvon Wrote: Your power supply is enough for your chiller

But as per the information i got for some manufacturer is that 60kW supply is not good enough for chiller & also can anybuddy suggest what type of water chiller i need? I mean there are some model i came to know 30TR, 40TR etc. so what capacity/flow of chiller I need for this system?

Thanks

Daniel

Parat Tech · 11-13-2014, 07:45 AM,

Dear, 90-120 kW is workable.

Thanks

Harish
Parat Technolgies

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	BMS 10-67, Type XII	achmadarifudinh	5	1,322	12-05-2019, 03:52 PM Last Post: loriolo
	chiller location	Neufeld	1	1,398	04-11-2019, 03:15 AM Last Post: Stephen Booth
	Metco Wokajet & Tafa JP 5000 Parts	RV_DMG	2	2,740	12-18-2015, 08:19 AM Last Post: RV_DMG
	JP 5000 Instruction Manual	RV_DMG	0	3,277	11-25-2014, 03:45 PM Last Post: RV_DMG
	Life of JP 5000 Gun Parts?	RV_DMG	5	4,819	11-14-2014, 03:33 PM Last Post: hvofhamid
	JP 5000	RV_DMG	3	3,110	10-07-2014, 12:39 PM Last Post: RV_DMG
	Stoichiometric ratio calculation for JP 5000	Lalit	3	4,628	06-13-2013, 07:33 PM Last Post: Intel55
	SS14 coating type	Ramin	0	2,017	05-14-2013, 04:12 AM Last Post: Ramin
	JP 5000 spray issue	mehongbo	1	3,500	02-04-2011, 03:36 PM Last Post: derek
	Jet Kote O2 and H2 supply pressure requirements?	Intel55	1	3,628	06-26-2009, 03:32 PM Last Post: Intel55