tensile test failure analysis (HELP)
05-23-2017, 08:07 PM,
#1
tensile test failure analysis (HELP)
I need some help understanding TRUE tensile test failures.
How can you tell the difference between a coating tensile test failure and a glue tensile test failure?
Say for instance a set bond bars fail below the requirement and approx 50% of face failed at the glue interface (glue on each face of bond bar). What would be the failure?
Where can I find some literature to help me understand this more?
thank you in advance for any help.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  HVOF T800 Tensile Bond Strength issue wgg237 3 5,929 09-11-2023, 09:18 AM
Last Post: Sail L
  metco 101bns powder / tensile strength RogerMilam 6 6,010 05-08-2022, 07:53 PM
Last Post: landemarre
  Tensile Test TBC giuiori75 1 3,384 09-29-2017, 02:35 AM
Last Post: achmadarifudinh
  Gun failure demionkrishan 2 3,975 08-22-2016, 04:49 AM
Last Post: Joris Kraak
  low tensile strength problem raviswanadha 8 8,783 06-07-2013, 09:34 AM
Last Post: kriskros
  Coating failure analysis (thermal cycling/abrasion/oxidation) Arkzik 2 5,806 05-28-2013, 07:45 PM
Last Post: Arkzik
  Help for Semi-quantitative analysis for phase %ages in XRD Lalit 0 2,976 01-12-2013, 03:44 PM
Last Post: Lalit
Question What is the correct EN standard for the Tensile Testing of 18CrNiMo7-6? Anand Trivedi 0 3,916 10-09-2012, 06:52 PM
Last Post: Anand Trivedi
Question How do reduce tensile strength of coating Metco 52C-NS? Christine 24 30,014 10-27-2011, 03:51 PM
Last Post: Gordon
  tensile properties metalman 3 5,628 11-23-2010, 02:14 PM
Last Post: Gordon
  tensile bond strength and met examination TurbineRepair 7 10,406 07-23-2008, 03:33 PM
Last Post: TurbineRepair



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd