Login

wasif · 02-23-2009, 02:45 PM,

hi members:

hopefully all of you will be enjoying ur research. can someone has gone through epoxy composite(Mg,Si, graphite) based abradable coating applicable in compressors. any relevant information will be appreciable.

regards

wasif

***Gordon*** · 02-26-2009, 03:13 AM,

Hi wasif

I assume these coatings are applied as a paste and cured rather than by thermal spray? No experience I'm afraid. Can only bump thread to top Rolleyes

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Pure Aluminum on GFRP Composite Substrate	ahmadsahid	4	4,531	05-01-2014, 01:34 PM Last Post: Gordon
	coating aluminium composite panel	nicubila	2	7,844	12-13-2010, 08:14 AM Last Post: Fydor75
	Cracks in abradable coatings	fhyuan	3	5,424	06-01-2010, 05:00 PM Last Post: fhyuan
	Question on abradable coatings : manufacturing and tests	karusade	8	12,924	10-27-2008, 05:19 PM Last Post: landemarre
	Mg, Si, graphite based abradable coatings	wasif	1	4,524	05-30-2008, 04:42 PM Last Post: ThermalMan
	future trend in abradable coatings	wasif	4	8,562	03-13-2008, 06:04 PM Last Post: ARIKAN
	Heat Treatment of Abradable Coatings	wasif	1	4,286	09-04-2007, 03:59 PM Last Post: Gordon
	Coating for ceramic composite tool	murt100	3	7,277	02-07-2007, 06:36 AM Last Post: drramc
	[split] Abradable coatings	Madila Awalini	2	7,122	02-05-2007, 09:30 AM Last Post: Madila Awalini
	Abradable coatings	kcc	14	21,437	02-02-2007, 06:03 PM Last Post: Gordon