Login

wasif · 02-23-2009, 02:45 PM,

hi members:

hopefully all of you will be enjoying ur research. can someone has gone through epoxy composite(Mg,Si, graphite) based abradable coating applicable in compressors. any relevant information will be appreciable.

regards

wasif

***Gordon*** · 02-26-2009, 03:13 AM,

Hi wasif

I assume these coatings are applied as a paste and cured rather than by thermal spray? No experience I'm afraid. Can only bump thread to top Rolleyes

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Pure Aluminum on GFRP Composite Substrate	ahmadsahid	4	5,530	05-01-2014, 01:34 PM Last Post: Gordon
	coating aluminium composite panel	nicubila	2	8,980	12-13-2010, 08:14 AM Last Post: Fydor75
	Cracks in abradable coatings	fhyuan	3	6,454	06-01-2010, 05:00 PM Last Post: fhyuan
	Question on abradable coatings : manufacturing and tests	karusade	8	14,451	10-27-2008, 05:19 PM Last Post: landemarre
	Mg, Si, graphite based abradable coatings	wasif	1	5,264	05-30-2008, 04:42 PM Last Post: ThermalMan
	future trend in abradable coatings	wasif	4	9,534	03-13-2008, 06:04 PM Last Post: ARIKAN
	Heat Treatment of Abradable Coatings	wasif	1	5,168	09-04-2007, 03:59 PM Last Post: Gordon
	Coating for ceramic composite tool	murt100	3	8,166	02-07-2007, 06:36 AM Last Post: drramc
	[split] Abradable coatings	Madila Awalini	2	8,009	02-05-2007, 09:30 AM Last Post: Madila Awalini
	Abradable coatings	kcc	14	23,608	02-02-2007, 06:03 PM Last Post: Gordon