Sealer
12-18-2009, 05:32 PM,
#1
Sealer
Hello,
I am trying to find the most suitable sealer for ceramic coating.
Rolleyes It is still the same paper dryer roll - very aggresive corrosive environment .
There for such applications I found two - Metcoseal ERS, Metcoseal URS sealers. But which one is better I dont know Ashamed0002 Maybe someone have experience with them and can give advise?
Best regards
Arturas
Reply
12-21-2009, 08:23 AM, (This post was last modified: 12-21-2009, 08:23 AM by vevecaz.)
#2
RE: Sealer
Hello,
You can try on a sample Loctite 290 too, after warming the ceramic coating between 110 and 150 �C.
After, remove the film over the coating by polishing.
Reply
05-02-2010, 08:06 AM,
#3
RE: Sealer
Hello Vevecaz and Arturas,

Even I am looking for a sealant for Ceramic Coatings.

Loctite 290 that Vevecaz suggested, specification says that it needs anaerobic conditions for curing. Have you tried this already? what was your experience with this? can this be sprayed with the pneumatic paint spray gun?

My other concern is that L290 is meant for fastening and sealing of threads and they are not expected to come in contact with very corrosive or reactive chemicals/surrounding conditions. If they are used for sealing ceramic coating, they will be exposed to the same environement that the coating is subjected to. How can one be sure that the ingredients of Loctite 290 do not react to the surrounding conditions and affect the entire process in an unexpected way?!

Arturas, did you happen to find more options for your sealing application?

Can anybody suggest other sealer manufacturers (other than Metco and Praxair) for this application?

Thanks for your inputs.

Regards

K09
Reply
05-03-2010, 03:07 PM,
#4
RE: Sealer
Hi,
There are series of polymeric thermal spray coatings materials available with generic names and covering a wide range of wear & corrosion resistance properties.You can select the right one for your application and use the same as sealant.
ram chattopadhyay
Reply
05-25-2010, 08:20 AM,
#5
RE: Sealer
Hi,

Here in Holland and Belgium, several large manufacturers of Hydraulic Plungers are busy daily with ceramic plungers. Ceramics like Metco 130 and Cr2O3/Tio2. They all use Loctite 290 since years. Be carefull, you need the correct procedure for applying.
I have all the info, you can contact me (off line?).

Regards,

Martin Scholte
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Sealer application on TSA Massey 8 18,471 10-10-2016, 09:25 AM
Last Post: LouisRichter
  Non-stick sealer sprayloud 3 4,392 06-29-2016, 09:38 AM
Last Post: Vadim Verlotski
  Bronze + AP Sealer KevGarty 1 4,228 10-07-2014, 10:00 PM
Last Post: loriolo
  phenolic sealer manufacturers sreenuvundela 0 3,046 04-02-2014, 12:45 PM
Last Post: sreenuvundela
  Silicone based sealer for stainless steel arc spray pappabearlee 6 8,692 11-30-2012, 01:58 PM
Last Post: MichiganMan
  Adhesive/sealer David Jones 0 3,431 03-20-2012, 05:26 PM
Last Post: David Jones
  sealer for sink roll coating karunanidhi 17 25,534 05-01-2011, 08:32 AM
Last Post: dadasotare
  Function of Metco AP- sealer. shabisyed 3 9,990 02-03-2011, 03:05 AM
Last Post: kschewe
  Sealer for ceramic coatings k09 4 10,564 05-29-2010, 05:10 AM
Last Post: Stephen Booth



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd