Sealer for ceramic coatings
11-02-2009, 01:23 PM,
#1
Sealer for ceramic coatings
Hi Everyone,

Does anybody here have any information about the sealers used for Corona treater rolls.

The rolls need ceramic coatings but for the roll to be functional, it should have negligible porosity and very high surface finish. To facilitate this, the rolls are coated with a sealer.

I want to know what type of sealers are available for this particular application. Any input in this matter is highly appreciated.Smile

Regards

K09
Reply
11-03-2009, 06:41 PM,
#2
RE: Sealer for ceramic coatings
Hi K09

Sealers based on wax, epoxy, silicone and phenolic have all been used. Firstly sealing is required to reduce moisture ingress into coating to stabilise dielectric properties. Sealer needs compatible level of dielectric properties to compliment or improve coating performance.
Reply
05-25-2010, 08:14 AM,
#3
RE: Sealer for ceramic coatings
Why not try Ceramics (particle sizes -5+22 micron or so) with HVOF? The Deposit efficiency is not so good but the quality in excellent, (very dense, smooth and high electrical resistance. Personally have experience for bearings with Metco 105SFP and Diamond Jet Hybrid system.

Regards,

Martin Scholte
Reply
05-25-2010, 07:10 PM,
#4
RE: Sealer for ceramic coatings
Hi Martin

Sign0016 to the Surface Engineering Forum.

Thanks for your input.

I can see that coating doing well for top end Corona roll application.
Reply
05-29-2010, 05:10 AM,
#5
RE: Sealer for ceramic coatings
(05-25-2010, 08:14 AM)Martin Scholte Wrote: Why not try Ceramics (particle sizes -5+22 micron or so) with HVOF? The Deposit efficiency is not so good but the quality in excellent, (very dense, smooth and high electrical resistance. Personally have experience for bearings with Metco 105SFP and Diamond Jet Hybrid system.

Regards,

Martin Scholte

Hi Martin: a few questions on this interesting application
  1. What fuel gas did you use with the Metco 105SFP?
  2. Does Metco have a set a parameters published for this?
  3. What lead you to the Ceramics via the HVOF, seems relatively uncommon except for via the top gun...
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Surface Treatment of Ceramic Coatings brkozdemir41 0 1,922 12-18-2020, 12:09 AM
Last Post: brkozdemir41
  Sealer application on TSA Massey 8 18,471 10-10-2016, 09:25 AM
Last Post: LouisRichter
  Non-stick sealer sprayloud 3 4,392 06-29-2016, 09:38 AM
Last Post: Vadim Verlotski
  Bronze + AP Sealer KevGarty 1 4,227 10-07-2014, 10:00 PM
Last Post: loriolo
  phenolic sealer manufacturers sreenuvundela 0 3,045 04-02-2014, 12:45 PM
Last Post: sreenuvundela
Exclamation Cleaning Ceramic (Chrome oxide) coatings - as-sprayed Leanne 1 4,642 02-04-2013, 08:18 PM
Last Post: kschewe
  Color Difference in Ceramic coatings of Plasma Spray sreenuvundela 2 5,971 01-01-2013, 08:30 PM
Last Post: loriolo
  Silicone based sealer for stainless steel arc spray pappabearlee 6 8,692 11-30-2012, 01:58 PM
Last Post: MichiganMan
  Adhesive/sealer David Jones 0 3,431 03-20-2012, 05:26 PM
Last Post: David Jones
  Reduce Porosity in Ceramic Coatings rik 5 11,261 03-13-2012, 10:05 AM
Last Post: loriolo
  sealer for sink roll coating karunanidhi 17 25,534 05-01-2011, 08:32 AM
Last Post: dadasotare
  Function of Metco AP- sealer. shabisyed 3 9,990 02-03-2011, 03:05 AM
Last Post: kschewe
  Sealer Arturas 4 9,134 05-25-2010, 08:20 AM
Last Post: Martin Scholte



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd