Question about Metco ar2000 robot
08-29-2010, 10:49 AM,
#1
Question about Metco ar2000 robot
Hello
I want to buy a 2nd hand Metco 9m APS System with Metco ar2000 robot.
someone told me that Metco ar2000 have some problem in programming and metco has stopped using of this robat.
do you confirm this?
thank you
Reply
08-30-2010, 12:36 PM, (This post was last modified: 08-30-2010, 12:52 PM by LEN WOOD.)
#2
RE: Question about Metco ar2000 robot
Hello Hamed Fazelm,

There are still AR2000s in service throughout the world. But I would check first to see if all spare parts are still available for this early Mitsubishi manufactured unit.
Obviously it depends on many factors, but most importantly:
• Price
• History
• Severity of use, work environment and run hours
• Operation, Service and maintenance manuals available?
• Warranty, support or backup?

Thermal Spray use of robots varies as does the environment in which they operate. Ask to see the service log or breakdown book and find out why it’s being sold?

Better newer robots are cheap these days and there are some excellent used/refurbished ABBs and Fanucs around.

S/Metco switched to ABB robots a long time ago.

BTW: F4 & F1 spray better TBCs than other guns.

Cheers
Len Wood
METAL MONSTER LTD
BIGGER BETTER FASTER MORE!
Ph: +64 9 4730705
Fax: +64 9 4730706
Email:: len@metal-monster.com
www.metal-monster.com
Reply
08-31-2010, 10:55 AM,
#3
RE: Question about Metco ar2000 robot
The AR2000 Mitsubishi robot i san old version of robot, and it is very hard to program, and take a lot of time to do it, and it’s an obsolete product with no more SM spare parts, so you need a very good electronic technician in order to built or repair electronics parts, at the time it was projected, it was one of the best robot in the market, but electronic technology run very fast, and the new line of robot are very easy to program and use.
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Robot speed & RL turn table calculation demionkrishan 9 6,508 05-12-2020, 07:32 PM
Last Post: Lemster68
  IRC5 ABB robot issue demionkrishan 0 654 09-19-2019, 04:21 PM
Last Post: demionkrishan
  Sulzer Metco 58NS Copper-Nickel-Indium alloy powder question RaymondF2 1 1,415 09-05-2018, 04:35 PM
Last Post: ServiceTech
  Robot Speed ykang 4 5,948 02-17-2010, 03:09 AM
Last Post: LEN WOOD
  Robot in VPS Vessel jeffsays163 1 3,461 03-02-2008, 09:50 AM
Last Post: ycwbycwb



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd