04-25-2014, 09:06 PM,
|
|
Oeno
Member
|
Posts: 8
Threads: 3
Joined: Feb 2014
Reputation:
0
| |
Metco sprabond
Dear members, I`m looking for technical bulletin for Metco sprabond wire .
What is the service temperature for this wire,oxidation resistance ,can it be used for fretting and particle erosion at high temperatures?
|
|
04-29-2014, 05:46 PM,
(This post was last modified: 04-29-2014, 05:49 PM by Met.Eng..)
|
|
Met.Eng.
SuperMember
|
Posts: 137
Threads: 45
Joined: Sep 2010
Reputation:
3
| |
RE: Metco sprabond
Here is my tech. bulltetin ( 1970 )
Typ MacroHardness : 40 HRc
Bond St: 7500 psi
Dens:8,86
|
|
05-01-2014, 01:12 PM,
|
|
Gordon
Administrator
|
Posts: 1,802
Threads: 70
Joined: Jun 2006
Reputation:
9
| |
RE: Metco sprabond
Hi Oeno
Molybdenum has poor oxidation resistance and is only fit for low temperature service in oxidising environments. Only in vacuum or non-oxidising environments you can take advantage of its high refactory properties.
|
|
05-02-2014, 11:48 PM,
|
|
RE: Metco sprabond
Metco sprabond is the same material that the Molywire of PLANSEE, I did contact to Sulzer Metco, they told me that they only sell the wire of PLANSEE, all the time the wire has been the same.
If you want the technical information, give me your e-mail.
Regards
Villalob
|
|
05-03-2014, 11:11 AM,
(This post was last modified: 05-03-2014, 11:20 AM by plasmajet1990.)
|
|
plasmajet1990
SuperMember
|
Posts: 162
Threads: 29
Joined: Oct 2007
Reputation:
3
| |
RE: Metco sprabond
(04-25-2014, 09:06 PM)Oeno Wrote: Dear members, I`m looking for technical bulletin for Metco sprabond wire .
What is the service temperature for this wire,oxidation resistance ,can it be used for fretting and particle erosion at high temperatures?
Hi,
Sulzer Metco 8228
Molybdenum Wire
Technical Bulletin #10-674
Service up to 320 °C (610 °F)
Maxim hardness: 62-65 HRC (HVOF wire process)
Ion
|
|
05-06-2014, 10:43 PM,
|
|
Oeno
Member
|
Posts: 8
Threads: 3
Joined: Feb 2014
Reputation:
0
| |
RE: Metco sprabond
HVOF wire process ???
|
|
05-08-2014, 03:55 PM,
|
|
Oeno
Member
|
Posts: 8
Threads: 3
Joined: Feb 2014
Reputation:
0
| |
RE: Metco sprabond
(05-07-2014, 03:10 AM)Stephen Booth Wrote: Just a side note, what are you going to use the Sprabond for? What application?
Are you using as a bond, or as traction coating?
To restore dimension on flange,but I need thicker ~1,5mm hard coating ,at elevated temperatures around 500 °C.
|
|
12-31-2023, 05:00 AM,
|
|
minh_8888
Active Member
|
Posts: 16
Threads: 9
Joined: Nov 2010
Reputation:
0
| |
RE: Metco sprabond
(05-02-2014, 10:31 PM)Met.Eng. Wrote: Give me your email. I will send you thec. Bullletin
khachhtc01@gmail.com
Thanks so much
Nguyen Hong Minh
|
|
|