Poll: What is your involvement in Surface Engineering?
You do not have permission to vote in this poll.
manufacturer or supplier of S.E equipment or materials
35 15.70%
provider of S.E treatments
78 34.98%
user of S.E treatments
49 21.97%
25 11.21%
academic or consultant with interests in S.E
17 7.62%
end user or other category not listed
19 8.52%
Total 223 vote(s) 100%
* You voted for this item. [Show Results]

Member Survey
07-15-2010, 05:49 PM,
RE: Member Survey
Hi collegues of surfaces,
I've known this forum some years ago and since there and first of all I'd like to thanks Gordon for the opportunity for dialogue.
I've been working as surface engineer dealing with corrosion and wear degradation, and looking for solution sometimes by thermal spray.
Nice to join you,

"Progress of science requires opportunity for share with no restriction all results and all point of views: this freedom of communication is indispensable for the development and extension of scientific knowledge". [A. Einstein]
07-16-2010, 02:03 PM,
RE: Member Survey
Hi Moira

Sign0016 to the Surface Engineering Forum.
10-22-2010, 09:13 PM,
RE: Member Survey
Hello everyone,
I am Andrey, a TS company owner, we provide services and producing our own TS equipment. I've been in this business for past 10 years, having a hard task of promoting this technology in Ukraine and Russia. Thank you Gordon for creating this excellent site and helpful comments.
01-10-2011, 04:14 AM,
RE: Member Survey
Hi everyone, here is Angus from Jinhua Leaptone Construction Material S&T CO.,LTD in China, which is a specialized manufacturer making various kinds of aluminium composite panels and high quality pre-coated aluminium coils. If meet your need, pls contact me via the means list below:
E-mail: zhengzhijiang1983@yahoo.com.cn
TEL: 0086-579-82590259
Mobile: 0086-13616797213
Skype: leaptone1983
MSN: zhengzhijiang1983@hotmail.com
Yahoo: zhengzhijiang1983@yahoo.com.cn
02-27-2011, 05:31 AM,
RE: Member Survey
Dear all,

I'm muxx. Studied Materials Engineering. My recent research was about DS Ni-based superalloy.

Hope i will gain more and more knowledge here.
Thanks a lot.
11-22-2011, 09:33 PM,
RE: Member Survey
Hi All,
I am quite new TS Network. I have a BS degre in Metallurgical and Materials Engineering from METU Turkey.
I have been working for six months in a aviation company in Turkey. we are using 9MB, DJ200 AND TRIPLEX PRO AND 6PII guns.
ı will have many questions about robotic, coatings, masking problems etc..
Nice to meet you allSmile
03-11-2013, 12:28 PM,
RE: Member Survey
Voted! I'm a heavy user of coating for valves, especially for ball valves.
04-02-2014, 10:39 AM,
RE: Member Survey
Hi All,

I am a Chemical Engineer, working as a Production Supervisor in an electro-forming department, which produce plated grids and etched slits.
08-19-2014, 07:58 PM,
RE: Member Survey
When I want to fix something, I find the oldest guy there.
When I want a free lunch, i look fro the youngest engineer or salesman.
Loss of experienced employees is among business's biggest failings right now. They seem oblivious to the harm it is doing and are completely unwilling to prepare for the retirement or loss of experienced employees.
11-17-2014, 09:40 AM,
RE: Member Survey
This global forum is a great source for relevant data in the coatings industry!
I might be just a operator yet I have gained a working knowledge just by reading the threads in this forum.
Thanks gordon
02-24-2015, 03:14 AM,
RE: Member Survey
Hello all,

I just wanted to stop by here to introduce myself before I asked my question that I cannot seem to find an answer for anywhere else!

I work in the aerospace/gas turbine engine overhaul industry. We use a variety of thermally applied coatings. Our systems include flame, plasma and dual wire (arc). I am working on an HVOF system but I can only hope.
I was trust into this role as another engineer left for greener pastures. 3 years in and I wouldn't turn back.


06-24-2015, 12:10 PM,
RE: Member Survey
Thought the survey was a really good idea thanks for posting it
12-11-2015, 10:38 PM,
RE: Member Survey
Hi! To all. Specially gordon. Lets introduce myself. I am D.K.Francis Basically i am an accountant. Two years before i was relocate for a new opportunity to saudi arabia but suddenly the company said we dont have any Vacancies; by the time i got an opportunity in TS industry and currently working successfully. I am so keen to know new things as always. I am using 9MC .9MP-DJ controls Fanuc robots 6axis,2axis RL turn table and 3MBTD 24,32,52&55 inches gun, 9MB gun,11MB gun,ipro gun,plazjet and DJ2600 HVOF gun. So far i know some basic things only, i basically join here to develop my knowledge. I can see most of you guys are having excellent knowledge in TS .please do help me to improve my skills. Specially i request gordon to help me to be one of the technical person very soon. Gordon please guide me how to post questions and be an active member in SEF. Regards,D.K
07-19-2016, 09:49 PM,
RE: Member Survey - Introduce yourself here
(09-16-2008, 10:29 PM)Gordon Wrote: Hi Sprayguy

Sign0016 to the Surface Engineering Forum.

Hello everyone, my name is Roger, from San Diego, CA. , have been in the thermal spray worl for about 20 years in all aspects, enjoy searching Gordons site for helpful items.

Possibly Related Threads…
Thread Author Replies Views Last Post
  New Member ewcommunity 0 982 07-22-2019, 08:08 AM
Last Post: ewcommunity
  New member steve_d 0 1,378 11-05-2017, 10:08 AM
Last Post: steve_d
  New Member Jord-E 0 1,726 03-17-2017, 08:40 PM
Last Post: Jord-E
  New Forum-Member based near Berlin Christian_B 1 2,209 02-23-2017, 05:55 AM
Last Post: plasmajet1990
  Hello! From A New Member Wascator 4 4,543 09-15-2014, 09:28 AM
Last Post: Laurent
  A New Member Introduce Here Agili Ron 0 2,229 10-17-2012, 11:11 AM
Last Post: Agili Ron

Users browsing this thread: 1 Guest(s)

Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd