Poll: What is your involvement in Surface Engineering?
You do not have permission to vote in this poll.
manufacturer or supplier of S.E equipment or materials
15.70%
35 15.70%
provider of S.E treatments
34.98%
78 34.98%
user of S.E treatments
21.97%
49 21.97%
student
11.21%
25 11.21%
academic or consultant with interests in S.E
7.62%
17 7.62%
end user or other category not listed
8.52%
19 8.52%
Total 223 vote(s) 100%
* You voted for this item. [Show Results]

Member Survey
09-16-2008, 10:29 PM,
#21
RE: Member Survey - Introduce yourself here
Hi Sprayguy

Sign0016 to the Surface Engineering Forum.
Reply
09-18-2008, 03:11 AM,
#22
RE: Member Survey - Introduce yourself here
Hi all,
I am a new HVOF process engineer, using Praxair jp5000 gun. working in one of the manufacturing comapany in Singapore.
Reply
09-18-2008, 12:33 PM,
#23
RE: Member Survey - Introduce yourself here
Dear all,
As the material and mechanic students we are working on a new design of HVOF gun, we have some problems in the test step of our gun
In which procedure oxygen and fuel (LPG) valves should be opened and closed for safe operation and avoiding from flash back?
could you please send us any offer about testing?
you can see our gun in following links

Thank you

Reply
09-18-2008, 04:26 PM,
#24
RE: Member Survey - Introduce yourself here
Hi Alvinwlh

Sign0016 to the Surface Engineering Forum.

(09-18-2008, 03:11 AM)alvinwlh Wrote: Hi all,
I am a new HVOF process engineer, using Praxair jp5000 gun. working in one of the manufacturing comapany in Singapore.
Reply
09-18-2008, 05:34 PM,
#25
RE: Member Survey - Introduce yourself here
Hi Sutech

Sign0016 to the Surface Engineering Forum.

I will copy your original post to form a new thread "Safety Guidelines - Handling and Use of Gases in Thermal Spraying". Please post there for continued discussion on this particular topic and not in this thread.
[Edit - Notice your similar post "valve opening procedure" in "Forum and Website" forum section and your links work here Smile I will move this one instead to "Surface Engineering" forum section http://www.gordonengland.co.uk/sef/valve...t-609.html as I think this is a more suitable place]

I'm sorry, your links appear not to work. I suspect you copied a long link direct into your post and it has been truncated. You need to use the "Insert hyperlink" tool. See screen captures below:

   

   

   

Please try and edit your post and post in new thread. Alternatively, you could try uploading direct as attachments.







(09-18-2008, 12:33 PM)sutech Wrote: Dear all,
As the material and mechanic students we are working on a new design of HVOF gun, we have some problems in the test step of our gun
In which procedure oxygen and fuel (LPG) valves should be opened and closed for safe operation and avoiding from flash back?
could you please send us any offer about testing?
you can see our gun in following links

Thank you
Reply
09-25-2008, 01:36 PM,
#26
Information  RE: Member Survey - Introduce yourself here
Hi everybody, I'm St�phane (french firstname for a belgian guy) and offently work on coating inspection. This Forum seems to be a very good way to increase our knowledges... Thanks to Gordon.Sign0184
Reply
09-25-2008, 02:49 PM,
#27
RE: Member Survey - Introduce yourself here
Hi Stéphane

Sign0016 to the Surface Engineering Forum.
Reply
09-30-2008, 09:31 AM,
#28
RE: Member Survey - Introduce yourself here
Hi everybody,
My name is Michael Reinwald, student of Mechanical engineering at the Ohm University of Applied Sciences in Nuremberg, Germany.
At the moment I am doing an internship in Singapore and because of one project here I joined this forum. Hope to get some helpSmile...
Thanks,
Michael
Reply
09-30-2008, 02:36 PM,
#29
RE: Member Survey - Introduce yourself here
Hi Michael

Sign0016 to the Surface Engineering Forum.
Reply
10-24-2008, 06:35 AM, (This post was last modified: 10-24-2008, 06:46 AM by heidesign.)
#30
RE: Member Survey - Introduce yourself here
Hello all.

NEWBY here. Not quite an old fart, but willing to learn. Just an art shop owner and fabricator. Looking for ways to improve my products. Heres one with powder sprayed bronze and copper on stainless.
[Image: sculpturefurniture006small.jpg]

Here is a section of one of three sculptures we also did.

[Image: sculpturefurniture015small.jpg]

What do you think guys/gals?

Also looking for affordable way to build up coatings faster. We have coated glass, wood, some metals, and are currently seeking ways to spray into molds and not have to farm out casting to the foundries. Ideas?

Thanks,

Bill
Reply
10-24-2008, 05:08 PM,
#31
RE: Member Survey - Introduce yourself here
Hi Bill

Sign0016 to the Surface Engineering Forum.

Thank you for your interesting introduction post and pictures. I think thermal spray has a large scope for for artistic applications.

Quote:Also looking for affordable way to build up coatings faster. We have coated glass, wood, some metals, and are currently seeking ways to spray into molds and not have to farm out casting to the foundries. Ideas?
Best to open new thread in the main Surface Engineering Forum, rather than bury good topics in this thread. Smile
Reply
10-31-2008, 08:46 AM,
#32
RE: Member Survey - Introduce yourself here
Hi,
Im working in this area of TS from last 5 yrs. With a PhD in high temp coatings using nano sized particles. Having background of mechanical as well as material Science.
Regards
Girish
Reply
11-14-2008, 08:34 AM,
#33
RE: Member Survey - Introduce yourself here
Hi i am N. karunanidhi. working in thermal spray technology for the last 3 years. Currently i am working for Metallizing Equipment Co. Pvt Ltd. Jodhpur, INDIA.
Reply
11-24-2008, 05:08 AM,
#34
RE: Member Survey - Introduce yourself here
Hi, I'm service engineer in my company, Tanjung Maintenance Services Sdn Bhd located in Malaysia, We currently use metal spray process and HVOF to fabricate new and services parts in oil and gas industry especially in static and rotating equipment
Reply
12-31-2008, 03:11 PM, (This post was last modified: 12-29-2009, 02:49 PM by djewell.)
#35
RE: Member Survey - Introduce yourself here
I am David Jewell, and I work with UniqueCoat Technologies. We supply HVAF equipment and coating services. We also supply twin wire arc systems. I have 5 years of experience working with HVAF on a variety of applications from general manufacturing to mining to high-tech applications.
Reply
01-01-2009, 01:54 AM,
#36
RE: Member Survey - Introduce yourself here
I am a thermal spray specialist for job / work-shop and products as well in Indonesia, please let me know if you have any problems in material or technical for thermal spray technology also in grinding problems may occurs.
Thanks & Regards,
Iwan Sedaryawan - Website : https://www.ciptaagung.com
Happy0193
Reply
01-01-2009, 01:04 PM,
#37
RE: Member Survey - Introduce yourself here
Hallo all,
I am Vijay Deshpande working in the field of Thermal spray coatings for last 28 years and is having hands on expirience on powder flame, wire flame, twin wire arc, Plasma spray, HVOF PTA. Right now I am responsible for thermal spray business of of a job shop in Mumbai
Wishing you all a happy new year
Vijay Deshpande
Reply
01-08-2009, 11:28 AM,
#38
RE: Member Survey - Introduce yourself here
Hello all,

I'm a thermal spray operator in an Aircraft engine overhaul facility in Wales, UK. We do repairs on aircraft components with sulzer metco plasma F4/F1/3MB, HVOF Diamond Jet, flame spray and TAFA wire arc guns.

Thought i'd join up as we sometimes get problems with our coatings and maybe you guys can help us out with some practical advice.

Thanks in advance!

Sam
Reply
01-09-2009, 01:54 PM,
#39
RE: Member Survey - Introduce yourself here
Hi guys, I am an engineer of a Thermal coating Co. I have all the typical headaches of a guy who has to deal with atmos plasma, HVOF & LPPS systems!! Forum is class & its great to be here! Big Grin
Reply
01-09-2009, 04:25 PM,
#40
RE: Member Survey - Introduce yourself here
Hi *Plasma Junkie*

Sign0016 to the Surface Engineering Forum.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  New Member ewcommunity 0 982 07-22-2019, 08:08 AM
Last Post: ewcommunity
  New member steve_d 0 1,378 11-05-2017, 10:08 AM
Last Post: steve_d
  New Member Jord-E 0 1,726 03-17-2017, 08:40 PM
Last Post: Jord-E
  New Forum-Member based near Berlin Christian_B 1 2,209 02-23-2017, 05:55 AM
Last Post: plasmajet1990
  Hello! From A New Member Wascator 4 4,543 09-15-2014, 09:28 AM
Last Post: Laurent
  A New Member Introduce Here Agili Ron 0 2,229 10-17-2012, 11:11 AM
Last Post: Agili Ron



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd