Cracks in WC-12Co coating
06-19-2012, 04:34 PM,
#1
Cracks in WC-12Co coating
Hi, everyone:
I have been working on spraying of WC-12Co coating for quite a long time. However, the cracks(about 0.06-0.07 mm, perpendicular to the interface) are invariably present in the cross-sections when viewed at a magnification of 200. I wonder if the cracks resulted from the spraying process or from metallographic preparation processes?
The coatings are sprayed with a Metco Unicoat model sray system.
Reply
06-19-2012, 09:37 PM,
#2
RE: Cracks in WC-12Co coating
Hi,
if the samples preparation proceeds with correct way according to ASTM wont see cracks founded.
i think that's happen because a a deferential of thermal expansion between substrate and coat materials
select proper substrate with near thermal expansion of coating layer.

Mustafa
Metallurgical Engg.
Reply
06-20-2012, 04:36 AM,
#3
RE: Cracks in WC-12Co coating
Dr Tofi:
What do you mean by "sample preparation"? the spray or the metallographic preparation? What's the ASTM document?
It is required the coating be sprayed on a titanium alloy.
Thank you!
Reply
07-19-2012, 04:25 PM, (This post was last modified: 07-19-2012, 04:42 PM by Ken59.)
#4
RE: Cracks in WC-12Co coating
(06-20-2012, 04:36 AM)fhyuan Wrote: Dr Tofi:
What do you mean by "sample preparation"? the spray or the metallographic preparation? What's the ASTM document?
It is required the coating be sprayed on a titanium alloy.
Thank you!


Hi
You can stop the cracking by with a thin layer of 5-10 mil of Ni/Cr only (80/20) on the base and the then spray the WC-12. Plus cool the part down slow,and leaving it in the spray lathe at about the same RPMs. but I was using Hvof to spray parts.
Reply
07-26-2012, 04:09 PM,
#5
RE: Cracks in WC-12Co coating
Hi, the drawing has it that the coating be plasma sprayed directly onto a titanium alloy substrate.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  WC-12Co low hardness DanyGans 3 5,034 05-04-2018, 04:25 PM
Last Post: DanyGans
  WC Coating Craze Cracks demionkrishan 3 3,860 04-14-2018, 12:46 PM
Last Post: Stephen Booth
  Spray fused coating cracks Arturas 24 23,578 12-07-2016, 02:57 PM
Last Post: abhay
  HVOF 88 WC-12Co Cracking problem on wire drawing capstan Hector Monjardin 7 7,954 10-19-2016, 11:55 PM
Last Post: Hector Monjardin
  88WC-12Co HVOF coating H2 contact Hector Monjardin 1 3,951 10-18-2016, 01:22 PM
Last Post: Vadim Verlotski
  thikness of WC/12Co by HVOH mlavar 2 3,705 07-25-2013, 01:33 PM
Last Post: Met.Eng.
Shocked Cracks! in bond coat Christine 5 8,902 11-28-2011, 11:26 AM
Last Post: landemarre
  Cracks in abradable coatings fhyuan 3 6,889 06-01-2010, 05:00 PM
Last Post: fhyuan



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd