Coating selection
11-05-2015, 08:16 AM,
#1
Coating selection
Which powder is best selestion for APS process on pump pistons
D=95mm, L=433mm
Hardness 60HRC
Working pressure of pistons 150bar
Working temperature 50 C-60 C.

Metco 73-F-NS or Metco 447?
Reply
11-05-2015, 08:14 PM,
#2
RE: Coating selection
Hi texnicar
To answer your question is necessary to know the working media the pump works, and for the high pressure of 150 bar, APS coating is not recommended, the only coating that surely works is a spray and fuse Ni base powder, I recommend Colmonoy 88, and as alternative coating HVOF chrome carbide powder
Best regards
Luigi
Reply
11-06-2015, 03:07 PM,
#3
RE: Coating selection
(11-05-2015, 08:16 AM)texnicar Wrote: Which powder is best selestion for APS process on pump pistons
D=95mm, L=433mm
Hardness 60HRC
Working pressure of pistons 150bar
Working temperature 50 C-60 C.

Metco 73-F-NS or Metco 447?

Metco 447

Regards,
John
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Metco powder code selection GuadalupeSullivan 1 3,854 06-27-2019, 10:24 AM
Last Post: loriolo
Question Metco powder code selection mohsen hasanzadeh 1 3,039 10-10-2016, 09:15 PM
Last Post: loriolo
  Diamond Wheel Selection Met.Eng. 1 3,393 06-01-2016, 04:11 PM
Last Post: shantanu
  How do I do Bond Coat Selection? RV_DMG 2 4,678 03-13-2015, 11:44 PM
Last Post: loriolo



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd