Posted by Gordon England on February 26, 2003 at 02:27:32:
In Reply to: Gas Flow Controllers (N2/Ar/He) posted by Richard O'Leary on February 25, 2003 at 16:58:01:
: What are the general specifications (Accuracy, etc.) required?
: I am looking to provide solutions to applications in which reliability and automation is required.
: p.s. hope this isn't deemed as 'blatant advertising'!
: :-)
Hi Richard
I see no advert here! I'm sure most people would not find a little self or company promotion objectionable as long as it is relavent and useful. I think most people know when that grey line is crossed.
Re: gas flow controllers which I assume is for plasma spraying processes and I assume you work for a company supplying/manufacturing mass flow meters. Generally, the tube and float type mechanical type flow meters were expected to work within about + or - 5% of normal working flows. Most modern plasma spray equipment now use mass flow meters, which I would hope work well within this degree of accuracy.
Plasma gas flow is a critical parameter and has a complex relationship with plasma arc voltage and anode and cathode geometry. Some rely on fixing gas flows and monitor the resultant plasma arc voltage (system I prefer) and others prefer adjusting the gas flow to achieve a specific voltage.
Which ever way you set the parameters it is important that the plasma gases are delivered with consistent accuracy. I'm tempted to babble on further with this complex subject, but I will stop here.
Richard, perhaps you could give us some pro's and con,s on mass flow meters vs mechanical tube and float flow meters.
Regards Gordon
Follow Ups:
Surface Engineering Forum
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
www.gordonengland.co.uk
Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to the page if you wish to reactivate a thread on the new forum.
Introducing
Nature of Thermal Spray Coatings
Surface Engineering in a Nutshell
Surface Engineering Forum
Thermal Spray Gun Repair Service
Plasma Consumable Parts
Thermal Spray Powder Supplies
Applications:
Thermal Spray Coatings on Carbon and Glass Fibre Reinforced Polymers
HVOF Coating of Paper Making Roll
Abradable Coatings
Thermal Spray Processes:
Combustion Wire Thermal Spray Process
Combustion Powder Thermal Spray Process
Arc Wire Thermal Spray Process
Plasma Thermal Spray Process
HVOF Thermal Spray Process
HVAF Thermal Spray Process
Detonation Thermal Spray Process
Plasma Flame Theory
Cold Spray Coating Process
Wear and Use of Thermal Spray Coatings
Corrosion and Use of Thermal Spray Coatings
Glossary of Thermal Spray and Surface Engineering Terms
Image Directory for Thermal Spray Coatings
Plasma Gas Flow Information
Plasma Gas Flow Correction Calculator
Contact Form
Links to other interesting sites related to thermal spray and surface engineering
Reciprocal Links
Periodic Table of the Elements
SI Units
Calculators for Conversion between Units of Measurement
Hardness Testing
Surface Engineering Message Board Archive
Surface Engineering Message Board Archive Index
Photography Gallery2
Photography Gallery3
© Copyright Gordon England