acetylene cylinder heating blankets
12-05-2014, 12:51 PM,
#1
acetylene cylinder heating blankets
anyone have any issues with the use of acetylene cylinder heating blankets?
Is it safe to heat up acetylene cylinders to 120 degrees Fahrenheit?
Will it change the flame parameters?
Reply
12-09-2014, 07:31 AM,
#2
RE: acetylene cylinder heating blankets
Dear Chromalloy:

Sounds very dangerous to me! Typically the maximum working pressure of Acetylene in gaseous form is 15PSI in most countries. Exceeding 15 psi its my understanding that acetylene is unsafe, and the molecule is unstable, hence explosive.

Thats why acetylene is disolved into acetone in the cylinder, something like carbonated drink...

Maybe others can add....
Stephen James Booth
www.ipsteknokraft.com
www.teknokraft.com
Indonesia WhatsApp +6281905603262

Reply
12-20-2014, 08:21 AM,
#3
RE: acetylene cylinder heating blankets
I agree with Stephen, it's very unsafe to do modifications on gas net, without advices from a gas specialist, as surely you use a flame gun, with volumetric flow meter, parameters could change if room temperature change, that is the reason to have a constant room temperature, or use mass flow meter.
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Inconel 625 Plasma Sprayed Compressor Cylinder (ID) demionkrishan 4 990 06-17-2019, 01:32 PM
Last Post: demionkrishan
  acetylene flow limits for flame spray metco 6c chromalloymachi112 1 2,754 12-04-2014, 12:18 AM
Last Post: Met.Eng.
  Consumables for cylinder block made of grey cast A_Hanert 2 2,646 06-25-2014, 10:19 AM
Last Post: A_Hanert
  SPM for MG cylinder Vijay Deshpande 10 13,053 08-19-2013, 12:34 PM
Last Post: Gordon
  coating Al cylinder for wear resistance sal 7 6,023 09-08-2012, 06:58 AM
Last Post: sal
  High Pressure Cylinder Compressor Walls Repair HVoilF 2 4,951 05-29-2012, 09:54 PM
Last Post: HVoilF
  HVOF Powder for Block Engine and Cylinder Liner minh_8888 1 3,195 06-21-2011, 02:28 PM
Last Post: Met.Eng.
  GTV GLC HVOF TopGun acetylene pressure and flows Met.Eng. 2 6,723 01-17-2011, 06:11 PM
Last Post: Gordon
  Powder pre-heating Met.Eng. 2 3,675 10-21-2010, 02:46 AM
Last Post: kschewe
  Hv2000 or Top Gun with acetylene Intel55 9 12,388 09-12-2010, 09:12 AM
Last Post: asinmaz
  Heating powder feeder landemarre 4 5,713 12-15-2008, 03:04 PM
Last Post: Steph
  coating cylinder heads mitch 5 5,660 10-07-2008, 03:15 AM
Last Post: mitch



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd